SEALED BID SALE PACKAGE
SB2977 - Aerospace

August 10th, 2007

See Individual lot for POC Information
Main Site(s):



BIDS WILL BE ACCEPTED VIA THE GL WEB SITE, FAX AND MAIL.
A 10% BUYER’S PREMIUM IS IN EFFECT FOR THIS SALE.

** IMPORTANT DATES FOR THIS SALE **
Inspection Date and Time: August 8 & 9 By Appointment Only / Call site listed for preview times
Date and Time Bids Due: August 10 8:00PM ET
Award Date: August 11  
Pay In Full By: August 20  
Removal Period: August 20 - 27 / No Weekend Removal By Appointment Only / Call site listed for removal times

INSIDE YOU WILL FIND...
Sealed Bid Terms & Conditions
Credit Card Transaction Information
Bank Letter of Guarantee and Wire Transfer Information
Fax Cover Letter
Express Submittal Form
Sealed Bid Package
Authorization for Pick-Up
Waiver and Release of Liability
Sealed Bid Checklist
Corporate Headquarters

15051 N. Kierland Blvd. 3rd Floor • Scottsdale, Arizona 85254
Tel: (480) 367-1300 • Fax: (480) 367-1450
E-mail: info@govliquidation.com • Website: www.govliquidation.com

 

THE FOLLOWING TERMS AND CONDITIONS PERTAIN TO BOTH USEABLE SURPLUS AND SCRAP MATERIAL SALES

Section 1: PARTIES AND DEFINITIONS ( top )

  1. Surplus Acquisition Venture, LLC ("SAV"), Government Liquidation, LLC ("GL") and DOD Surplus, LLC ("DS") are the companies established by Liquidity Services, Inc. ("LSI") to administer the sale of useable surplus (SAV & GL) and scrap material (DS) for the U.S. Defense Reutilization and Marketing Service ("DRMS"). Government Liquidation ("GL") is also the marketplace from which we sell all property and material and is the name you will encounter most often in communications, on our web site, and in direct dealings with our employees. Invoices and some other correspondence may be sent in the name of SAV, GL or DS. We have three companies simply because we are required to do so under our sales contracts with the DRMS. Except where we have specified otherwise, your dealings with us should be governed by the principle that you are dealing with a single organization. Throughout these Terms and Conditions, Surplus Acquisition Venture, LLC, Government Liquidation, LLC and DOD Surplus, LLC are referred to as GL.
  2. The terms "you" and "your" refer to a Bidder, Buyer, or Registrant of GL. The terms "we," "us," "our," "GL," and "Company" refer to GL. References to the singular include the plural and vice versa. References to the masculine include the feminine and vice versa.
  3. These Terms and Conditions comprise the entire agreement between you and GL relating to the bidding process and the purchase of property offered and sold by GL (the "Agreement").
  4. A "Term Contract" is an Agreement between GL and a Buyer that GL will deliver a specific property to the Buyer at a specific location or locations for a specific period of time, not less than one hundred eighty (180) days (six months). Term Contracts are governed by specific terms and conditions that are in addition to these general Terms and Conditions. Buyers are billed on Term Contracts based on deliveries made by GL.
  5. A "Spot Sale" is an Agreement between GL and a Buyer that GL will deliver a specific property to the Buyer at a specific location or locations for a specific period of time, not more than one hundred seventy nine (179) days (one day short of six months). Buyers are invoiced for the entire bid amount, buyer’s premium and any applicable taxes at the time they are notified of their high bid. Any adjustment based on actual deliveries made to the Buyer will be made after all property has been removed by the Buyer.
  6. "Useable" property is property sold for its originally intended purpose, or a reasonable alternative purpose, which may require substantial repair, refurbishment or replacement of parts or components, or modification, but is nonetheless sold for some purpose other than the value of its material. Useable property is sold in GL sales events numbered below 6000 (e.g., 2975, 3045).
  7. "Scrap" material is property sold for its material content value, and for which it is not intended that the property or any of its parts or components be used for its originally intended purpose. Scrap material is sold in GL sales events numbered 6000 or higher (e.g., 6001, 7250). Most scrap material is sold with a requirement that it be mutilated beyond any ability to reconstitute it for its originally intended purpose. Most scrap material is sold by weight; however, some scrap material is sold by unit. Where mutilation of the scrap material is not required, the scrap material may be sold by units rather than by weight. Some items sold with a unit quantity may still require mutilation. The absence of a requirement to mutilate should not be construed as an implication by us that the property is fit for its originally intended purpose or should be purchased with a useable purpose in mind.

Section 2: ELIGIBILITY ( top )

  1. By placing a bid on any sale on this web site, you agree to be bound by these Terms and Conditions. In order to participate in a GL sales event, you must:
    1. Be at least 18 years of age
    2. Agree to this Agreement by clicking on the appropriate button provided at the bottom of these Terms and Conditions
    3. Agree that we are the only two parties to this contract
    4. Agree that there are no contingencies to these sales other than those stated by us in the Terms and Conditions or in the lot description at the time of sale
    5. Be competent to enter into a contract
    6. Agree to pay for any bids placed using your unique website username and password
    7. Agree to remove the property from the military installation where it is located within the required time frame
    8. Be free from any previous financial obligations owed to us
    9. Be capable of receiving a Trade Security Control (TSC) clearance to buy any property that requires such a clearance
    10. Be a real person or business entity, with a verifiable address, telephone number and email address
    11. Agree to deal with us in good faith, and not attempt to defraud, cheat or wrong us or the U.S. Government
    12. Agree to abide by any existing security regulations at any military installation from which you purchase property or at which you wish to inspect property prior to placing a bid
    13. Agree to inspect the property upon which you are bidding or waive the opportunity to conduct a physical inspection of the property
    14. Agree that by waiving the opportunity to physically inspect the property prior to bidding, you are limiting your rights under this Agreement. We strongly encourage you to inspect property if you have any concerns or questions about the property's condition, operability, fitness for a particular purpose or merchantability.
  2. Before placing a bid on http://www.govliquidation.com, you must establish an account with us. Establishing an account is free, but requires you to submit personal information, which we will verify, before allowing you to place bids. All account information is secured via SSL 128-bit encryption. We do not share personal information provided by you with third parties, except under very limited circumstances. For more information about our privacy policy, please click here.
  3. We require you to provide us with an accurate mailing address, telephone number, email address, so that we can communicate with you regarding your account, purchases and payments. Your identity will be verified through a third-party data verification vendor. We may request additional personal information from you in order to verify your identity. You are responsible for updating any changes in the account information. We will verify your account information to verify your identity. We do this to protect you and to protect us from false bids, fraud, identity theft, and to ensure that government surplus items are not sold to people who have been prohibited by the U.S. Government from purchasing such items. Your agreement to these terms and conditions constitutes express consent to the verification of your identity.
  4. If you are registering as a business entity, you represent that you have the authority to bind the entity to these Terms and Conditions. A limit of one registration per business or individual will be enforced on our web site. Duplicate registrations will be de-activated from use.
  5. We reserve the right to accept or reject any or all bids. Any direction or prohibition stated on our web site or within these Terms and Conditions, unless specifically referring to GL shall be construed as a direction to or prohibition on the Buyer only. We reserve the right to limit the bid amounts proposed by any Bidder, either singly or in aggregate. We reserve the right to refuse any individual or business access to our sales events.
  6. You represent that you and the business for which you are acting as an agent are not listed on the Excluded Parties List System (EPLS), which is maintained at www.epls.gov, and that if it is discovered that you were an excluded party at the time you bid, any sale resulting from your bid is void, and you are liable to GL for damages resulting from your misrepresentation.

Section 3: EXPORT RESTRICTIONS / END-USE-CERTIFICATES ( top )

  1. You acknowledge and agree that certain goods, software, and technology may be subject to the export control laws and regulations of the United States, including but not limited to the Export Administration Regulations (EAR), the International Traffic in Arms Regulations, and regulations of the U.S. Department of Treasury, Office of Foreign Assets Controls. You agree you will comply with all applicable export laws and regulations.
  2. You may not, without prior U.S. Government authorization, export, re-export, or transfer any goods, software, or technology, either directly or indirectly, to any country subject to a U.S. trade embargo or sanction or to any resident or national of these countries, or to any person, organization, or entity on any of the restricted parties lists maintained by the U.S. Departments of State, Treasury, or Commerce. In addition, any goods, software or technology may not be exported, re-exported, or transferred to any end-user engaged in activities, or for any end-use, directly or indirectly related to the design, development, production, use, or stockpiling of weapons of mass destruction, e.g. nuclear, chemical, or biological weapons, and the missile technology to deliver them.
  3. We do not sell property to persons from the countries that are prohibited from receiving transfers of military equipment or technology. Please check with the appropriate government agency for a current list of prohibited countries. Buyers are advised that purchasing from us and then reselling or attempting to export to these countries is prohibited. The list of prohibited countries is subject to change at the discretion of the U.S. Government
  4. If you purchase property that will be exported outside of the United States, you must obtain proper export licenses prior to our transfer of title and release of goods. We may assist Buyers in obtaining export licenses, and you agree to pay the costs associated with obtaining any licenses required. Our assistance will be limited to providing information for the purpose of completing required export license applications, Shipper’s Export Declarations, or other forms. We cannot advise you as to which forms, which licenses, or what agencies may have jurisdiction over the property you purchase. You are encouraged to seek expert legal advice regarding export licensing. We are not an expert in the area of export licensing and do not hold ourselves out as such.

END-USE-CERTIFICATES [EUC] (DLA FORM 1822): ( top )

  1. GOVERNMENT LIQUIDATION WILL NOT SELL ANY DEMIL B OR Q PROPERTY WITHOUT AN APPROVED END-USE CERTIFICATE. When an END-USE-CERTIFICATE (EUC) is required to complete the transaction, no property will be released or removed until all certificates are filed and the property has been cleared for release. There will be no exceptions or exclusions to this requirement. The edition of the EUC, DLA Form-1822, provided online is the ONLY valid form accepted for this sales event. Once it is determined that you are the high bidder, after the sale close date, the following deadlines apply: You will have seven business days from the sale closing date to submit a completed EUC. If revisions to the EUC are necessary, you will have an additional five business days to make revisions and submit an EUC capable of being accepted by the DLA Office of Criminal Investigations Trade Security Control ("TSC") Office. Buyers who have not submitted an acceptable EUC (DLA Form-1822) within 12 business days will have their winning bids voided and liquidated damages assessed equal to the greater of 25% of the winning bid or thirty dollars ($30).
  2. The requirement that the EUC be complete, correct and legible is your obligation. We do not control the amount of time required for approval or the final decision to allow or disallow the release of the property to the individuals completing and filing the EUC.
  3. Prospective Buyers are notified that property sold is subject to Demil Code changes as imposed by the DRMS. If an item's Demil status changes to "B" or "Q", you agree to complete a DLA Form-1822 when informed of the change. Buyers will be notified in writing, with an explanation of the sale/lot/ item in question, and a copy of the End-Use Certificate will be provided for completion. This becomes a condition of sale.
  4. Sales for which EUCs have not been approved by TSC within 60 days of submission will be canceled by GL at our sole discretion without liquidated damages to the Buyer.

Section 4: THE PROPERTY ( top )

  1. YOUR PURCHASE OF OR PLACEMENT OF A BID ON THE PROPERTY CONSTITUTES ACCEPTANCE OF THE PROPERTY "AS IS" AND IN A USED CONDITION. "ACCEPTANCE" AS USED HERE ALSO MEANS THAT, BY PURCHASE OF THE PROPERTY, YOU WILL BE DEEMED TO HAVE EXAMINED, OR HAD THE OPPORTUNITY TO EXAMINE, THE PROPERTY AND AGREED THAT THE PROPERTY IS OF THE SIZE, DESIGN, CAPACITY AND MANUFACTURER SELECTED BY YOU, IS IN PHYSICAL AND MECHANICAL CONDITION ACCEPTABLE TO YOU, AND IS FIT FOR THE PARTICULAR PURPOSE AND USE YOU REQUIRE. WE DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, WITH RESPECT TO THE PROPERTY, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE PROPERTY IS FREE FROM LATENT DEFECTS. YOU ACKNOWLEDGE THAT WE ARE NOT A MANUFACTURER OF THE PROPERTY, OR AN AGENT OF THE MANUFACTURER, AND THAT THE ONLY EXPRESS WARRANTY WITH RESPECT TO THE PROPERTY IS THAT OF THE MANUFACTURER, IF ANY. YOU WAIVE ANY AND ALL CLAIMS AGAINST US FOR DAMAGES, LOSSES, COSTS, INJURIES, PENALTIES, EXPENSES, ATTORNEYS' FEES AND LIABILITIES OF WHATEVER NATURE WHETHER IN TORT, CONTRACT, WARRANTY OR STRICT LIABILITY, INCLUDING THOSE RESULTING FROM INJURIES OR DEATHS OF PERSONS AND DAMAGES TO PROPERTY RESULTING FROM OR ARISING OUT OF OR IN CONNECTION WITH THE USE, CONDITION, OPERATION, TRANSPORTATION, SERVICE, POSSESSION, RENTAL OR SALE OF THE PROPERTY, LOSS OR LIABILITY RESULTING FROM NEGLIGENCE, BREACH OF WARRANTY, PARTS, LABOR, DELAY OR BUSINESS INTERRUPTION BY YOU OR THIRD PARTIES, DELIVERY DELAYS, WORK STOPPAGES, FAILURE TO WARN, OPERATIONAL DEFICIENCIES OR FAILURES, BREAKDOWNS, STRIKES, ACTS OF GOD, UNAVAILABILITY OF THE PROPERTY OR OTHER CAUSE (WHETHER THESE CAUSES ARE AVOIDABLE OR NOT) CAUSED IN WHOLE OR IN PART, DIRECTLY OR INDIRECTLY BY YOU, US, YOUR OR OUR EMPLOYEES, YOUR OR OUR AGENTS OR THIRD PARTIES (COLLECTIVELY, "SPECIFIED CLAIMS"). UNDER NO CIRCUMSTANCES ARE WE RESPONSIBLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES TO YOU OR ANY OTHER PARTY. YOU AGREE TO INDEMNIFY, DEFEND AND HOLD US HARMLESS FROM AND AGAINST ANY AND ALL SPECIFIED CLAIMS.

PROPERTY DESCRIPTIONS: ( top )

  1. The information and descriptions found in the advertising materials for specific sales are deemed reliable but are not guaranteed. We neither assume responsibility nor make any warranty regarding the sale's contents. Condition codes, National Stock Numbers (NSN), Local Stock Numbers (LSN), National Item Identification Numbers (NIIN), and Scrap Condition List (SCL) codes are provided as received from the DRMS as assistance to our customers. We do not guaranty the accuracy of this information. It is your responsibility to verify an item’s information and description, including but not limited to, product condition, estimated weight, count, measure or other factors that determine the bid price. Information provided by us is not guaranteed and should not be considered as a substitute for your due diligence and physical inspection of the property.
  2. Items offered for sale as "scrap" require mutilation or demilitarization as a condition of sale. These items must be totally destroyed prior to re-sale or export and must be rendered useless beyond the possibility of restoration within thirty days of the removal of the property from the location of the sale, unless otherwise agreed to in writing by an authorized GL representative. IF MUTILATION OR OTHER DESTRUCTIVE SCRAPPING IS NOT REQUIRED, IT WILL BE ANNOUNCED IN THE LOT DESCRIPTION AT THE TIME OF THE OFFERING. GL must witness the mutilation of any scrap material requiring mutilation, which has not been mutilated prior to sale, and you agree to allow GL personnel access to your facility to witness such mutilation as is required. Mutilation may be accomplished at the Defense Reutilization and Marketing Office ("DRMO") prior to removal if permitted by the DRMS or at the Buyer’s facility. The DRMS or their designated U.S. Government representatives may accompany GL in witnessing the mutilation of property, and you agree to allow Government personnel to witness the mutilation of property. GL personnel, in their sole discretion, shall determine whether or not mutilation has been accomplished in accordance with these Terms and Conditions.
  3. Your bidding for scrap property on our website will constitute an acknowledgement of your responsibility to perform destructive scrapping on any items sold, unless the lot description specifically indicates that scrapping is not required.
  4. ITEMS ARE SOLD BY COMMODITY, AND WE RESERVE THE RIGHT TO REMOVE ITEMS FROM ANY SCRAP ACCUMULATION THAT ARE OUTSIDE OF THE SCOPE OF THE COMMODITY ADVERTISED FOR SALE. For example, if an accumulation of scrap contains both ferrous and non-ferrous material, but the lot is described as 50,000 lbs. of heavy unprepared iron and steel, you will not be permitted to remove as part of the lot, aluminum or copper, which was located in the same scrap accumulation at the time you inspected the lot.

SCRAP SALES: ( top )

  1. Bidding on scrap items is based on a lot price. However, when the lot is advertised with a weight quantity, the actual amount due will be determined based on the actual weight removed multiplied by a unit price per pound. This price per pound will be calculated by taking the total price bid divided by the estimated weight of the property. There will be no adjustments made for weight variances between the estimated weight and the actual weight that result in a discrepancy equaling a refund or supplemental invoice of two hundred fifty dollars ($250) or less. Variances that exceed two hundred fifty dollars ($250) will be adjusted for the full amount of the variance.
  2. Dunnage (including pallets, spools, drums, etc.) is included in the total weight unless specifically excluded via language in the lot description. No allowance for dunnage or any other materials included in the material loaded out will be permitted in calculating the total weight of the lot purchased.
  3. When our representative is unavailable to weigh out your truck, weight tickets from a licensed or certified third-party public scale will be required for all scrap sales. Failure to provide weight tickets will result in pricing at 2.5 times the maximum legal load capacity of the container used to remove the property. Estimated amounts will be adjusted upon the receipt of weight tickets from a third-party licensed or certified public scale. Falsification of weight tickets will result in your immediate banning from future bidding, and referral to appropriate law enforcement authorities.

DEMILITARIZATION AS A CONDITION OF SALE ("DCS") PROPERTY: ( top )

  1. Demilitarization As A Condition of Sale ("DCS") property are items that must be demilitarized pursuant to applicable Department of Defense regulations before title to the residue can pass to the Buyer. We will advise you of the demilitarization procedures for DCS property offered for sale on this website. Demilitarization will be effected by melting, popping, crushing, deforming, or otherwise mutilating the property so as to completely destroy its military purposes. The use of precision torch fixtures, saws, tools of any kind to minimize mutilation or demilitarization is forbidden. Buyers of DCS property are subject to surveillance and verification by the Department of Defense. Failure to perform the required demilitarization within 30 days of property removal may result in the Buyer being referred to the Defense Logistics Agency ("DLA") Office of Criminal Investigations ("DCIA") or other appropriate enforcement authorities, as well as the suspension of bidding privileges with us.

LARGE CALIBER (OVER 30 MM) SHELL CASES: ( top )

  1. You agree that you are not purchasing any large caliber (over 30 mm) shell cases for military use. You agree that you will not, directly or indirectly, use or dispose of in any fashion the items for military use. You agree that you will include this clause in its entirety in any later sale or transfer of title, or possession by you or your successor in title or interest. You agree that the items will not be exported for military use and, if exported for any reason, a full disclosure of their origin by reference to our sale and lot number will be made to the appropriate export licensing department or agency. Any item you plan to export must be completely destroyed prior to exportation.

DEMIL CODE CHANGES – RETURN OF RESTRICTED PROPERTY ( top )

  1. In the event that DRMS changes a Demil Code or determines that an item offered for sale by GL may not be sold, or must be sold with restrictions, GL may withdraw the item from sale or place additional restrictions on the sale at any time prior to the removal of the item by the Buyer. The Buyer will be limited in remedy to a refund of the purchase price and cancellation of the sale.
  2. Items sold by us, which are changed to a Demil Code status of other than B or Q from Demil Codes A, B or Q, or are otherwise determined to be restricted by DRMS, must be returned by you to the nearest DRMS facility, and you will be reimbursed for the purchase price and any documented transportation costs incurred by you. If you have already transferred the property to another party, you agree to provide the name and contact information of that party to the Department of Defense or other federal government agency charged with the investigation of the transfer or recovery of the property. Your failure to cooperate in returning these items, providing contact information of transferees or completing and submitting End-Use-Certificates upon any Demil Code change may constitute grounds for suspension of your account and prohibition from bidding in future GL or U.S. Government sales, and we reserve the right to suspend your participation without providing you any additional notice or warning.
  3. In the event that a Buyer is requested to return property subsequently determined by the DRMS to be restricted, Buyer understands that any certification to GL regarding what has been returned will be forwarded to the Government and be the basis for determining any refund due the Buyer. If you falsely claim a refund for property you have not returned to DRMS, you may be liable under the False Claims Act, 18 U.S.C. §287. Included with the request to return property, you will receive contact information for Fast Track Logistics, who will be responsible for returning the property to the Government at no cost to the Buyer.
  4. Buyers who are deemed by the DRMS to be "uncooperative" with attempts to recover property may be denied access to future sales events at the discretion of the DRMS.

HAZARDOUS COMPONENTS OR CONSTITUENTS ( top )

  1. According to the terms of our contract with the DRMS, GL sells only useable electronic devices, including reparable devices. GL makes no warranties or representations regarding the electronic devices it sells, and strongly encourages Bidders to personally inspect property prior to bidding. Any device which is damaged in transit or is found to be cracked, shattered or broken may subject the Buyer to regulations pertaining to the handling, storage, transportation, re-sale or disposal of electronic waste. Buyers are encouraged to check with their state department of environmental services to determine what regulations, if any, might apply under these circumstances.
  2. DRMS cautions that certain property may have components, parts, constituents or ingredients that may be corrosive, reactive, ignitable or exhibit other hazardous or toxic properties. You are cautioned to use and ultimately dispose of any hazardous components or constituents according to all applicable local, national or international laws and regulations in a manner safe for the public and the environment.
  3. Certain pieces of property may contain residual chemicals, friable asbestos, petroleum products and ozone depleting substances or other hazards. You acknowledge and agree that we are not responsible for providing documentation or certification regarding the identification or status of these substances. Certain pieces of property have design features that may be hazardous if warning labels are not heeded.

ADDITIONAL CAUTIONS REGARDING PROPERTY: ( top )

  1. With regard to the "Sunray" brand gas range, 30 size, Model No. 26JAOOX13, NSN 7310-01-046-2869, and electric range, 30 size, Model No. STC-26, NSN 7310-00-823-7386, manufactured by Glenwood Range Co., Delaware, OH, the following information is provided to prospective buyers. "While the oven is in operation and for a short period of time after the unit is shut off, the surface temperature of the oven door becomes excessively hot which may cause burns to anyone touching the door."

MEDICAL AND DENTAL PROPERTY OR DEVICES: ( top )

  1. If you buy medical and dental property from us, you must complete the online Food and Drug Administration (FDA) form FDA Certificate for Medical/Dental https://web.govliquidation.com/account/main?cmd=FDAcertificate before the property will be released. Submittal of this Form is a one-time requirement and will remain valid for all future purchases. You must complete either section A or section B of the form (whichever applies). It is your responsibility to provide an updated FDA Certificate in the event of a status change (from "A" to "B" or "B" to "A"). The FDA form may be completed prior to bidding (see link above) or after the sale is closed and notification is sent to you informing you of your successful bid on the property. Payment will not be accepted nor will any medical or dental property be released without the form. We decide what constitutes "medical" or "dental" property. It is your responsibility to complete and submit the form. In the event the FDA form is not completed within the specified period of time (stated for the sale), we reserve the right to withdraw the objects from the sale and dispose of them at our discretion. Should this occur, we will assess as liquidated damages the greater amount of 25% of the winning bid, or $30. GL does not review the form to ensure it is completed correctly, and our acceptance of the form does not guarantee that the completed form will be considered acceptable by the FDA. If you have questions about how the form should be completed, you should seek legal counsel.

Section 5: TRANSFER OF TITLE: ( top )

  1. Unless property is being sold with a requirement for demilitarization or other destructive scrapping, title will transfer to you upon removal of the entire lot from the military installation. Property that is paid for, but not removed within a timely manner, as defined by the removal instructions provided, will be considered abandoned, and we will resell the property. We will retain as liquidated damages monies paid by you for property that is subsequently abandoned for failure to remove in a timely manner. Title to property that requires demilitarization as a condition of sale (DCS) or that requires some other form of destructive scrapping will not pass to you until the demilitarization or destructive scrapping has been completed and evidence of completion has been provided to us. Under no circumstances will title to any property pass to the buyer until payment in full has been made to GL.

TRANSFER OF TITLE TO VEHICLES ( top )

  1. Government Liquidation will supply a SF97 to customers under the following conditions: The vehicle must have been sold in a "useable" property sale (Sale No. is less than 6000). GL will not issue SF97s for vehicles sold in Scrap material sales (Sales No. is greater than or equal to 6000). There is a processing fee of $60 for EACH SF97 requested. Customers requiring a state certificate of title will be charged $77.75. GL will determine whether your state requires a state certificate of title or a SF97. Customers requesting a duplicate state certificate of title will be charged $77.75. Customer must verify the following pertinent information required to complete a SF97:
    • Trailers – VIN#, Year, Make, Model, Body Style, and Weight
    • Vehicles – VIN#, Year, Make, Model, Body Style, Weight, MILEAGE, Number of engine cylinders and Fuel type
    • (Any missing information will delay our processing of your request)
  2. Complete the electronic Request for SF97 form found in the Forms section of the website (must be logged in to access this section). You are solely responsible for researching state requirements for titling and registration in your state and determining if the documentation provided by us will be accepted by your state or local Department of Motor Vehicles.
  3. We are not responsible for, nor liable for, any unauthorized use or operation of vehicles sold by us, for vehicles that are not legally registered with the state in which they are intended to be operated in, or for obtaining insurance and insuring vehicles that have been sold prior to any operation of the vehicle.
  4. You are solely responsible for obtaining any necessary state or local permits allowing you to move any vehicle from the location of the sale. You agree to defend, indemnify and hold us harmless for your failure to comply with the provisions of this section. Vehicles described as "residue" will be provided SF-97s that are annotated "NOT FOR ROAD USE."
  5. Any inspections required in order to complete a title application must be done at your expense and under your supervision. Check with your state regarding the requirements for applying for title prior to placing a bid.
  6. Where an original SF97 was provided to the customer for a conveyance sold by GL, requests for duplicate SF97s will be forwarded to the Vehicle Titling Department for their approval or rejection. GL has no obligation to provide duplicate documentation, and cannot guarantee that duplicate documentation will be made available. Where an original SF97 is provided to the customer for a conveyance sold by GL, at the time of transfer GL will assign the SF97 to customer via a Letter of Re-assignment. Requests for documents on vehicles sold more than one year prior to the date of the request will not be honored.
  7. Purchasers of NSN 2320010502084 please note: CHANGE OPERATING PROCEDURE BEFORE USE. APPLICATION OF ANTI-LOCK BRAKING SYSTEM (ABS) IS REQUIRED. FOR FURTHER INFORMATION ON ABS CONTACT JAMES D. CURTIS, 586-574-6484.

TRANSFER OF TITLE TO VESSELS ( top )

  1. Title to vessels will be passed via our invoice. In the event that you desire additional documentation, such as a vessel bill of sale, we will provide it to you at a cost of $25.00 per vessel. We do not warrant that the ownership documents provided by us will meet any state's requirements for titling vessels, and encourage you to research the title documentation requirements in your state to determine whether or not our procedure will meet its documentation needs. Requests for documents on vessels sold more than one year prior to the date of the request will not be honored.
  2. Buyers of "mil-spec " vessels must apply for a quasi title from the Naval Surface Warfare Center, Carderock Division, Combatant Craft Department, by completing a Request for Certificate of Build and Quasi Title to Vessel. The cost for a quasi title is $75.00. The form is available on the "Forms" section of "My Account" on our website.

Section 6: PAYMENT FOR PROPERTY ( top )

BUYER'S PREMIUM: ( top )

  1. We charge a buyer's premium of 10% of the bid amount on all purchases. The buyer's premium is considered a taxable amount, and will be taxed at the appropriate rate depending on the location of the property. Buyer's premiums are standard in the auction industry, and should be factored into your bidding strategy.

PAYMENT TERMS: ( top )

  1. Winning bid prices will not be adjusted after award due to an error in bidding or any other discrepancy regarding description, estimated weight, count, measure or other factors that may influence the final bid price of a lot.
  2. SCRAP DEMIL B AND Q PROPERTY SOLD IN SALES SERIES 6000+ (SCRAP SALES), UNLESS BEING OFFERED UNDER A TERM CONTRACT SALE, WILL BE INVOICED IMMEDIATELY UPON THE DETERMINATION OF A HIGH BIDDER FOR THE ENTIRE AMOUNT DUE, AND MUST BE PAID WITHIN THREE (3) DAYS OF NOTICE OF AMOUNT DUE. Credit cards submitted online will automatically be charged the full amount of your purchase (including buyer's premium and taxes) the next business day after the sale closes, unless otherwise noted on our website and unless you contact us prior to the close of the sale to specify alternative payment arrangements. No charges will be made to the credit card until the sales event has been closed and a successful bidder has been determined.
  3. Unless otherwise indicated in another written Agreement with GL, all payments must be received within 3 business days of the date of the invoice. For purposes of calculating time, the date of the invoice will not be counted as the first day.
  4. In the event you fail to pay the entire purchase price within the time set forth by us or fail to comply with any of these terms and conditions, we will assess as liquidated damages the greater of 25% of the winning bid or thirty (30) dollars. Note: Refunds will not be issued for amounts less than $2.50 nor will invoices be issued for sums less than $2.50.
  5. We reserve the right to require an earnest money deposit prior to or during bidding on certain lots at our sole discretion. We will notify potential bidders via language on the lot details page of any earnest money deposits required prior to bidding. Deposits from winning bidders will be retained and applied to the pending invoice or to any past due balances owed by the customer. Deposits from non-winning bidders will be returned.

PAYMENT: ( top )

  1. Acceptable forms of payment include VISA™, MasterCard™, American Express™, cashier's check, money order, wire transfer and company check with a bank letter of guarantee. You must make payment in full within 3 business days of the invoice date. The date of the invoice is not counted as the first day for purposes of calculating the payment deadline. There will be no extensions of the payment period granted.
  2. Credit cards submitted online will automatically be charged the full amount of your purchase (including buyer's premium and taxes) the next business day after the sale closes, unless otherwise noted on our website and unless you contact us prior to the close of the sale. Credit cards will not be accepted for any invoice in excess of $25,000; customers must submit payment via certified funds (i.e., wire transfer, cashier's check). No charges will be made to the credit card until the sales event has been closed and a successful bidder has been determined.
  3. If you choose a form of payment other than a credit card, the following information must accompany a letter of instruction:
    • Company name (if applicable)
    • Customer name
    • Telephone number
    • Sales event number or contract number
    • Signature and date
    • Twenty-five percent of total bid amount
  4. A valid credit card must be entered at time of bid submission regardless of the form of payment. Credit cards submitted by a Buyer must be in the name of the registered Buyer and be valid at the time a lot is awarded.
  5. ALL FUNDS MUST COME FROM THE REGISTRANT. GL WILL NOT ACCEPT THIRD PARTY FUNDS OF ANY KIND FOR ANY REASON.

SALES, USE OR EXCISE TAXES: ( top )

  1. We are obligated to collect sales, use or excise tax from ALL buyers. It is your responsibility to provide the required documentation when submitting a bid to claim an exemption. Taxes are charged based on the effective tax rate at the time the property is removed. This may be different than the initial rate at which you were charged when you paid for the property. You must submit re-sale or tax-exemption documentation from the state in which you are doing business AS WELL AS EACH STATE IN WHICH YOU ARE PURCHASING PROPERTY. We are not obligated to refund sales tax due to late submission of sales tax exemption documentation. Submission of all appropriate tax exemption forms must be received by us before scheduled closing date and time of the sales event in which you are participating. Re-sale certificates may be faxed to us at (480) 367-1450. You will be liable for all taxes, surcharges or other charges imposed on the sale of goods by any taxing authority if tax forms are not received by the scheduled closing time of the sales event in which you are participating. Requests for refunds of sales taxes must be submitted to the appropriate taxing authority directly. All property sold in the state of Hawaii is subject to an excise tax. There are no exemptions to the Hawaii excise tax.

Section 7: DEFAULT ( top )

  1. A default fee of 25% of the bid amount (excluding buyer’s premium and taxes), but not less than $30.00, will be assessed the Bidder who fails to pay within the required time period. GL must receive all payments that are associated with default fees via money order, cashier's check or wire transfer. Credit card payments will not be accepted as a valid form of payment of a default fee. From the time when a Buyer is determined to be in default until payment of the default fee is received, the Buyer's GL account will be temporarily suspended from all bidding activity. Automated payment reminders are sent as a courtesy only, and should not be considered a replacement for your responsibility to make timely payment.
  2. We reserve the right to charge a $25.00 fee for any credit card transaction that is rejected. Buyers are strongly encouraged to review the data in their profile prior to submitting bids and to make any corrections necessary to their credit card information at the time of bidding. Additionally, buyers who submit erroneous credit card information, or attempt to use credit cards that they are not authorized to use, are subject to sanctions, including account de-activation, and may be reported to appropriate law enforcement agencies.
  3. Any Buyer that attempts to rescind a credit card transaction without our express written consent (i.e., charge-back), will be immediately and permanently banned from our sales. Charge-backs can be considered as a form of credit card fraud, and thus may also be subject to sanctions or prosecution by law enforcement authorities.

Section 8: REMOVAL OF PROPERTY ( top )

  1. You understand that the DRMS reserves the right to withdraw any and all property available for each sale up to the removal period. If this occurs, our liability is limited to return of the purchase price paid for the lot. We have no liability for incidental or consequential damages.
  2. You are responsible for rigging, loading, securing and transporting purchased property, including all costs and risks associated with removal. Unless otherwise stated, we will provide a free tailgate loading but will NOT guaranty a specific loading time. In consideration for this 'no cost' loading service, you agree to release, hold us harmless and waive any and all claims, causes of actions, damages (including consequential damages or loss of use) or liabilities of any kind or nature. Please note that GL does not package items prior to pickup. Buyers need to make arrangements for packing of purchased items with a packing and shipping store, or other suitable vendor.
  3. Where we indicate the property must be loaded by the Buyer, you must provide all material handling equipment and properly trained and certified operators to operate said equipment. Additionally, you must provide proof of adequate general liability insurance, and proof of worker's compensation insurance. GL and the DRMS must be listed as additional insured on the general liability insurance. Your employees or agents are responsible for compliance with all federal, state, local and host installation environmental, safety and health regulations while operating equipment on the site.
  4. Unless stated otherwise, all lots include dunnage (cartons, pallets, shrink-wrap, bands, crates, etc.), and you must remove the entire lot. We are not responsible for the disposal of your unwanted items or dunnage.
  5. In the event we extend the removal period to accommodate your needs, you understand and accept that any liability and risk of loss does not rest with us or the DRMS, but is at your own risk.
  6. Any extension of the removal period may result in Buyer incurring storage charges. You agree that, unless waived in writing by GL, you are liable for storage charges for all items not removed within the removal period.
  7. Buyer certifies that Buyer maintains the minimum legally required workers compensation insurance on any employees performing work for Buyer at a GL facility
  8. You are responsible for any damages to property, including spills or releases of hazardous substances, which might occur during the removal process. Failure by you or your agent to clean up any releases or to repair any damages may result in your being banned from future participation in GL sales, and you may be reported to the appropriate authorities.
  9. Either you or your agent will be required to sign for all material in the presence of a GL representative (unless otherwise approved by an authorized GL agent) prior to removing property.
  10. You or your agents are responsible for property count and verification of lots purchased at the time of removal. If the property is not acceptable for any reason, do not remove it.

Section 9: ABANDONED PROPERTY ( top )

  1. A schedule for removal of property will be established for each sale. You must remove all property awarded within this time limit. If for any reason removal cannot be completed within the time period, it is your responsibility to arrange with our site manager for an extension of time. We are not responsible for property that is not removed within the time allotted. If property is not removed within the specified removal period or scheduled for removal at a later date with our site manager, we will consider the property to be abandoned by you, and you will have abandoned all right, title and interest in the property including the purchase price of the property. We are not required to send abandonment or late removal letters to you prior to exercising the right of abandonment.

Section 10: DISPUTED BIDS ( top )

TIE BIDS: ( top )

  1. In the event equal bids are received for the same lot, you grant us the sole and exclusive authority to resolve and make all final determinations with respect to those bids.
  2. Any item that is not paid for may be resold without further notice. Accordingly, in the event the successful bidder for any item fails to complete the purchase for any reason, we reserve the right to accept the next highest bid.
  3. Sealed Bid Sales - In the event of a tie during a sealed bid sale, the lot will be awarded to the Bidder whose bid was first received. This applies regardless of whether the Bidder entered their own bid or the Bidder faxed their bid to us to enter on their behalf.
  4. Internet Auctions - On the occasion of a "tied bid," despite whether the bid was accepted as an "auto-bid" or "straight bid," the lot in question will be awarded to the Bidder whose bid was first received. We keep a time stamp recording of all internet auctions and Bidding/Time activities and transactions.

POSTED TIMES: ( top )

  1. For internet auctions, posted closing times and displays of current time on our website are approximate. In addition, we reserve the right to close early or extend internet auctions at our discretion. Lots may be scheduled to close individually, in groups or entirely. Lot closing times will be advertised prior to the opening of the internet auction. At the scheduled closing time, the lots with active bidding will remain open for 15 minute increments until all bidding has ceased. You may participate during this time by entering from "My Auctions."

SEALED BID SALES: ( top )

  1. Sealed bids may be sent electronically via our website, by fax to (480) 609-5841, or by US mail or other commercial delivery methods to the address or number listed below. We are not responsible for bids that are not received, processed, illegible or not accepted due to technical difficulties regardless of their origin. Sealed bids cannot be cancelled, lowered or withdrawn once submitted. Sealed bids must be received by the established time for the specific sales event.

BID RETRACTIONS: ( top )

  1. Any requests for a bid retraction due to keystroke error must be received by us in writing via email to info@govliquidation.com, fax to (480)367-1450 or letter to the Scottsdale Support Office of GL, 15051 N. Kierland Blvd., Third Floor, Scottsdale, AZ, 85254, immediately upon discovery with the Subject: Bid Retraction. Additionally, customers must call Customer Service at (480) 367-1300 to follow up the written request, immediately. We will not recognize a request to retract a bid if the request impacts subsequent bidding on the lot in question. An auto- bid that has already affected the current bidding on a lot cannot be retracted, but may be lowered to the last bid increment placed at the time the request was received. Requests should include the bidder number, sale number and lot number affected.

Section 11: MISCELLANEOUS ( top )

  1. You agree that any dispute between the parties must be resolved under Arizona law and in a court located in Maricopa County, Arizona. You expressly agree to the exclusive jurisdiction of those courts to resolve any dispute, and you expressly agree not to contest that jurisdiction or venue. You also agree to accept service of process from such courts by certified or registered mail.
  2. All claims must be submitted to us in writing and must include the sales number & the lot number, the customer number and the invoice number, along with a narrative describing the basis for the claim. Claims as to counts or proper model must be noted by the Buyer or their agent on the invoice at the time of removal, and a written claim for adjustment must be submitted to GL within 30 days of the removal date. Disputes may be submitted via email to info@govliquidation.com, by fax to (480) 367-1450 or mailed to Government Liquidation, LLC, 15051 N. Kierland Blvd., Third Floor, Scottsdale, AZ, 85254, Subject: Dispute Resolution. We will not recognize claims related to property condition, minor count discrepancies or your failure to inspect the merchandise prior to bidding or removal.
  3. You agree that in the event that GL is unable to deliver the item or items for which you were deemed the high bidder, that the sole remedy available to you will be the reimbursement of monies paid to GL for the item(s) not delivered (i.e., a refund). You will not be entitled to restitution, incidental, consequential, special damages or specific performance.
  4. You agree to defend, indemnify and hold us harmless from and against any and all damages, costs, claims or liability (including reasonable attorneys' fees) for any injuries to persons or property of any type, occurring during your inspection of property, your presence at a GL facility or resulting from the sale, removal, use or operations of the purchased property
  5. If any provision of these terms and conditions is deemed illegal, invalid or unenforceable, the legality, validity and enforceability of the remaining terms will not be affected.
  6. Our failure to enforce any provision of these terms and conditions may not be construed or interpreted as a waiver of any of them. Any waiver of any term or condition must be in writing, signed by our authorized representative, and will be effective only for the instance specified in the writing.
  7. Any oral statement or representation by any representative of GL, changing or supplementing the offering or contract or any condition of the offering or contract, is unauthorized and confers no right on the Bidder or Buyer and may not be relied on. No interpretation of any provision of the contract, including applicable performance requirements, is binding on GL unless agreed to, in writing by GL.

NOTIFICATIONS: ( top )

  1. We may transmit notices by e-mail, fax or phone to the email address, fax and phone numbers provided by you during registration. We may also provide notice in written form delivered through the US mail or certified mail to the address provided by you. We are not responsible for your errors in conveying your contact information.

ELECTRONIC SIGNATURES IN GLOBAL AND NATIONAL COMMERCE ACT: ( top )

  1. Prospective Bidders are notified by this statement that your consent to this Agreement by clicking the electronic link indicating your agreement to be bound to these terms, meets the requirements of Section 101(c) (1) (C) (ii), the Consumer Consent Provision, of the Electronic Signatures in Global and National Commerce Act (ESIGN). You may print these Terms and Conditions, but they are subject to change by us. Changes to the Terms and Conditions will be effective from the time they are placed on our web site, in the Terms and Conditions section of the site, or any other section where they may appear.
  2. This Agreement is intended by the parties as a final expression of their contract and as a complete and exclusive statement of the Terms and Conditions of sale. No course of prior dealings between the parties and no usage of the trade may supplement or explain any term used in this Agreement. Acceptance or acquiescence in a course of performance rendered under this Agreement may not be used to determine the meaning of this Agreement even though the accepting or acquiescing party has knowledge of the nature of the performance and opportunity for objection.
  3. The headings used in these Terms and Conditions are for convenience only and shall not be considered in interpreting the provisions hereof.

TECHNICAL PROBLEMS: ( top )

  1. We do not guarantee or promise that our system for placing, receiving, collecting and tabulating bids on internet auction or sealed bid sales will be available without interruption, error-free or free from other defects. We do not guarantee or promise that our system for searching for property will be available without interruption, error-free or free from other defects. We have no obligation to ensure that a prospective Buyer's bid is received, properly and effectively processed or accepted. WE ARE NOT LIABLE TO ANY PROSPECTIVE BUYER ON ANY CLAIM OR ALLEGATION THAT THE PROSPECTIVE BUYER'S BID WAS NOT RECEIVED, PROPERLY AND EFFECTIVELY PROCESSED OR ACCEPTED DUE TO TECHNICAL ERRORS OR PROBLEMS WITH THE INTERNET AUCTION SYSTEM OF THIS WEBSITE. If any questions arise as to a bid price at which lots have been sold our record of the sale will in all cases be deemed to be final.
  2. The auto-bid feature will hold your bid, automatically raising it in the applicable bid increments (see "Help" section for information about bid increments) until you have won the lot or your limit has been reached. Bids can be placed for any dollar amount.

INTELLECTUAL PROPERTY: ( top )

  1. Trademarks. The Site and the Company's trade names, domain names and logos found on the Site are trademarks or service marks of GL. No display or use of such marks may be made without the express written permission of GL.
  2. Photographs are copyrighted material of GL and may not be copied or used in commerce without the express written consent of GL.
  3. All trademarks, trade names, logos, and service marks featured on this website are the property of the owners of said intellectual property. Government Liquidation disclaims any associations or endorsements that may be implied through the use of the trademarks, trade names, logos or service marks.

I UNDERSTAND THAT BY PARTICIPATING IN A GOVERNMENT LIQUIDATION OR DOD SURPLUS SALES EVENT THAT I AM BOUND AND I AGREE TO BE BOUND BY THESE TERMS AND CONDITIONS.

Government Liquidation, a marketplace of Liquidity Services, Inc.
15051 N. Kierland Blvd. , 3rd Floor Scottsdale , AZ , 85254 USA
Customer Service Hotline: (480) 367-1300 / (480) 367-1450 (fax)
E-mail: info@govliquidation.com
Website: www.govliquidation.com

Revised October 29, 2009

 
 
GL USE ONLY

15051 N. Kierland Blvd, 3rd Floor
Scottsdale, Arizona 85254
Tel: 480.367.1100     Fax: 480.596.4483

FAX COVER LETTER



CONFIDENTIAL FAX

SEALED BID SALE
SB2977 - Aerospace


TO: Government Liquidation, LLC
Attn: Administrator of Sales Events
SEALED BID CONFIDENTIAL FAX NO.: (480) 596-4483
FROM: Name ________________________________

Phone (_____)_________________________


NUMBER OF PAGES SENT (INCLUDING COVER PAGE) _________



By submitting a bid, Buyer agrees to Government Liquidation's Terms and Condition of sale
 

SB2977 - Aerospace - SEALED BID SALE - EXPRESS SUBMITTAL FORM

BIDDER INFORMATION MUST BE FILLED OUT COMPLETELY FOR FORM TO BE VALID.

Bidder Name Company
Address
City State Zip
Phone Fax

By submitting this bid, I/we agree to the GL Sealed Bid Terms and Conditions for this sale.

THIS FORM MAY BE USED TO SUBMIT BID(S).
SIMPLY WRITE THE LOT # AND BID AMOUNT IN THE APPROPRIATE COLUMNS.

THE MINIMUM BID FOR EACH LOT IN THIS SALE IS $150 (ONE HUNDRED FIFTY DOLLARS & NO CENTS).
A 10% BUYER'S PREMIUM IS IN EFFECT FOR THIS SALE.

Lot #Bid Amount
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
     
Lot #Bid Amount
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
     
Lot #Bid Amount
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
     
Lot #Bid Amount
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $
 $


By submitting a bid, Buyer agrees to Government Liquidation's Terms and Condition of sale
 
SB2977 - Aerospace
Lot # Bid Amount Qty Description
11 $ 1 LOT (2) FRESNEL LENS OPTICAL LANDING SYSTEM MDL: MK8 AIRPORT MARKER LIGHTS
15 $ 1 LOT (72) APPRX METAL TUBE ASSEMBLIES
16 $ 1 GENERAL ELECTRIC COMPANY PART# 571L279PC2 TURBINE ENGINE BLADE SET
17 $ 1 LOT (3) CANADIAN MARCONI CO DIGITAL INDICATORS
19 $ 1 LOT (2) GULL AIRBORNE INSTRUMENTS INC LIQUID QUANITY INDICATORS
20 $ 1 LOT (3) AMETEK ROTRON PART# 2002850-005 ALTERNATING CURRENT MOTORS . 5 HP, 208 V, 50/ 60 HZ, 3 PH
21 $ 1 LOT (54) APPRX METAL TUBE ASSEMBLIES
453 $ 1 LOT (2090) APPRX AEROSPACE COMPONENTS INCLUDES: TERMINAL STUDS, FIXED WIRE RESISTORS, FIXED FILM RESISTORS, ELETRICAL FUSE LINKS, CARTRIDGE FUSES, CONDUCTOR SPLICES, WASHER INSULATORS AND VARIABLE RESISTORS
454 $ 1 LOT (1012) APPRX AEROSPACE COMPONENTS INCLUDES: HOSE CLAMPS, FLUID FLOW RESTRICTOR, METAL TUBE ASSEMBLY, TEE TUBES, HELMET PAD, ELBOW TUBE, NONMETALLIC TUBING, ENGINE OIL PAN, ROTARY VANE SET AND DISK VALVE
459 $ 1 LOT (25400) APPRX AEROSPACE COMPONENTS INCLUDES: SPECIAL CABLE ASSEMBLIES, ELECTRICAL LEADS, CORD ASSEMBLIES, POWER CABLES, ELECTRICAL WIRING, WIRING HARNESS AND PATCH CORD
500 $ 1 CAE INC MAGNETIC VARIATION INDICATOR, PN:MA103567-01
501 $ 1 CAE INC MAGNETIC VARIATION INDICATOR, PN:MA103567-01
502 $ 1 LOT (11) HOWELL INSTRUMENTS INC TEMPERATURE INDICATOR, PN:BH187R-111, FOR ELECTRONIC TEST SET
503 $ 1 LOT (10) HOWELL INSTRUMENTS INC TEMPERATURE INDICATOR, PN:BH187R-111, FOR ELECTRONIC TEST SET
504 $ 1 LOT (10) HOWELL INSTRUMENTS INC TEMPERATURE INDICATOR, PN:BH187R-111, FOR ELECTRONIC TEST SET
505 $ 1 LOT (10) HOWELL INSTRUMENTS INC TEMPERATURE INDICATOR, PN:BH187R-111, FOR ELECTRONIC TEST SET
506 $ 1 LOT (7) ACFT HARDWARE TO INCLUDE: (2) HOWELL LABORATORIES INC, MDL 5250, MOISTURE CONTENT INDICATOR, (3) BELL HELICOPTER TEXTRON INC TEMPERATURE THERMOCOUP INDICATOR, PN:206-075-708-1 & (2) ATEC INC TEMPERATURE THERMOCOUP INDICATOR, PN:44030547
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 1 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
507 $ 1 LOT (13) ACFT HARDWARE TO INCLUDE: (1) GEM SENSORS INC SIGHT LIQUID INDICATOR, PN:RE120000, (1) BELL HELICOPTER TEXTRON INC TEMPERATURE THERMOCOUP INDICATOR, PN:206-075-708-1, (1) NAVEL AIR SYSTEMS COMMAND PRESSURE DIAL INDICATING GAGE, PN:627197-5, (5)UAISALA INC WIND DIRECTION AND SPEED INDICATOR, PN:11046, (1) HELIX TECHNOLOGY CORPORATION PRESSURE DIAL INDICATING GAGE, PN:3901018, (2) WEKSLER GLASS THERMOMETER CORP PRESSURE DIAL INDICATING GAGE, PN:AS2-43PPFRWCX & (2) WEKSLER INSTRUMENTS PRESSURE DIAL GAGE, PN:AS24-3PSP-LWBX
508 $ 1 LOT (15) HONEYWELL INTERNATIONAL INC ANITFRICTION BEARING HOUSING, PN:696659-160
509 $ 1 LOT (14) HONEYWELL INTERNATIONAL INC ANITFRICTION BEARING HOUSING, PN:696659-160
511 $ 1 LOT (7465) CONNECTORS & SOCKETS TO INCLUDE: (6370) AMPHENOL CORP ELECTRICAL CONNECTOR SOCKET, PN:230-10188, (785) BEE LINE INC. RECEPTICAL ELECTRICAL CONNECTORS, PN:52-010-000-220 & (310) RADIO RECEPTOR CO ELECTON TUBE SOCKET, PN:49151-PH-57-49A
700 $ 1 CONNECTORS TRIWALL TO INCLUDE: CONNECTOR, PN:MS3108824-20P, CONNECTOR, PN:60-42017-125 & CONNECTOR, PN:46506000
701 $ 1 ACFT HARDWARE TRIWALL TO INCLUDE: SPACER, PN:5171177, SPRING, PN:573799 & PREFORMED PACKING, PN:126-024
800 $ 1 LOT (1)TRIWALL HARDWARE SUPPLIES INCLUDES: LOOP CLAMPS, ANGLE BRACKETS, MACHINE SCREWS, PROTECTIVE CAPS, STRAP WEBBING GASKETS (N0 SCREENING PERMITTED)
801 $ 1 LOT (1)TRIWALL AEROSPACE SUPPLIES INCLUDE: CARTRIDGE FUSES, BUSHING & BEARINGS, SLEEVE, SPACE PLATE, DIAPHRAGM VALVE, FLAT WASHERS, SPRINGS, FILTER ELEMENTS, MOUNT RESILIENT (NO SCREENING PERMITTED)
803 $ 1 LOT (1)TRIWALL AIRCRAFT SUPPLIES INCLUDE: SCREWS, NUTS, BRACKET MOUNTING, BUTT HINGES, WASHERS, ABRASIVE DISK, GASKET & SEAL SET, INCANDESCENT LIGHT (NO SCREENING PERMITTED)
805 $ 1 LOT (1)TRIWALL AIRCRAFT SUPPLIES INCLUDES: NONMETALLIC GROMMET, LOCK WASHERS, CLOSE TOLERANCE SCREW, CLAMPING CLUTCH, PROTECTIVE DUST MASK (NO SCREENING PERMITTED)
807 $ 1 LOT (1)TRIWALL MACHINERY SUPPLIES INCLUDES: V-BELT, ROLLER CHAIN, HEAD CLAMP, PULLEY GROOVE, TURBINE GEAR, COLLAR SHAFT, CAM CONTROL, STRAIGHT SHAFT, MANUAL LEVER CONTROL, GEAR SPUR, COUPLING SHAFT FLEX (NO SCREENING PERMITTED)
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 2 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
808 $ 1 LOT (1)TRIWALL AIRCRAFT SUPPLIES INCLUDES:O-RING, GASKETS & PREFORMED PACKING MATERIAL, QUICK RELEASE PIN, RESILIENT MOUNT, NONMETALLIC BUSHING, PROTECTIVE DUST COVER, WELDED WIRE, COLLATED SCREWS STRIP (NO SCREENING PERMITTED)
809 $ 1 LOT(1)TRIWALL HARDWARE SUPPLIES INCLUDES: NAIL'S (1 INCH), SHAFT SEALS, FASTENERS, LOCK WASHERS, VARIOUS LAMPS & BEARING SLEEVES
812 $ 1 LOT (1)TRIWALL HARDWARE INCLUDES: SINGLE SWITCH COVER, ELECTRICAL COUPLING, SHEAR BOLT, SCREW CAP, DOOR STOP (NO SCREENING PERMITTED)
813 $ 1 LOT (1)TRIWALL AIRCRAFT SUPPLIES INCLUDE: GASKETS, O-RINGS, PREFORMED PACKING MATERIAL, BRACKETS & SPACER PLATES, NUTS & SCREWS, JUNCTION BOX, CONDUIT CONNECTOR, TOGGLE SWITCH, QUICK RELEASE PIN (NO SCREENING PERMITTED)
814 $ 1 LOT (2)TRIWALLS LIGHTING SUPPLIES INCLUDES: ELECTRIC FLOOD LIGHT, INCADESCENT LAMPS, CARTRIDGE LAMP, LIGHT LENSW, GLOW LAMP (NO SCRENING PERMITTED)
815 $ 1 LOT (1)TRIWALL LIGHTS & LIGHT FIXTURES INCLUDE: SYLVANIA 120V LIGHT BULBS, RED BEAM SPOT LIGHT, VEHICULAR STOP TAIL LIGHT, LENS LIGHT, LIGHTING FIXTURE, BALLAST LAMP, LAMP CARTRIDGE (NO SCREENING PERMITTED)
816 $ 1 LOT (1)TRIWALL AIRCRAFT SUPPLIES INCLUDES: SLEEVE BUSHING, V-BELT, ACFT BALL BEARING, TAPE ROLLER BEARING, ROD END PLAIN BEARING (NO SCREENING PERMITTED)
817 $ 1 LOT (1)TRIWALL ELECTRICAL & ELECTRONIC SUPPLIES INCLUDE: CAPACITORS, FIXED RESISTORS, ROTARY SWITCH, WASHERS, SET SCREWS, HELICAL SPRING, PLAIN HEX NUTS, SPACER RINGS, FUSES (NO SCREENING PERMITTED)
818 $ 1 LOT (1)TRI-WALL HARDWARE SUPPLIES INCLUDE: HOSE ASSEMBLY, GLOBE VALVES, BENT TUBES, FANS, FILTERS (NO SCREENING PERMITTED)
850 $ 1 LOT (1) TRI-WALL AIRCRAFT COMMODITIES TO INCLUDE: TAPPING SCREWS, MACHINE BOLTS, PROTECTIVE DUST CAPS AND PRESSURE SWITCHES (ALL QUANTITIES ARE APPROX & BASED ON DRMO COUNT)
851 $ 1 LOT (1) TRI-WALL AIRCRAFT COMMODOTIES TO INCLUDE: SLEEVE BUSHINGS, FLAT PULLEY, ROTARY FILE
852 $ 1 LOT (1) TRI-WALL HARDWARE TO INCLUDE: MACHINE SCREWS, SHOULDER BOLTS, FLAT WASHERS
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 3 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
902 $ 1 LOT (1152)APPRX. AEROSPACE ITEMS. INCLUDES: PLAIN ENCASED SEAL, GASKET, PACKING RETAINER, SHIM, KNOB, PREFORMED PACKING, HEADLE SHOULDER PIN, SNAP HOOK, SEAL, O-RING, FLAT WASHER, LOCK-RELEASE LEVER, FLUID FILTER ELEMENT & PNEUMATIC TIRE WHEEL RIM.
903 $ 1 LOT (3694)APPRX. AEROSPACE ITEMS. INCLUDES: FLAT WASHER, ARBORHOLE, PREFORMED PACKING, GASKET, O-RING, PIN, SPACER, NUT, MACHINE BOLT, VALVE DISK, OIL SEAL, LOWER RING, PACKING RETAINER, RECESSED WASHER & ANGLE BRACKET.
904 $ 1 LOT (175)APPRX. AEROSPACE ITEMS. INCLUDES: ELECTRIC DRILL, EXTRACTOR, CORDLESS SCREWDRIVER, MACHINE BOLT, AXIAL FAN IMPELLER, WATER DEMINERALIZER CARTRIDGE, SOLID RIVET & MAGNETIC PIPE PLUG.
905 $ 1 LOT (1296)APPRX. AEROSPACE ITEMS. INCLUDES: GASKET, PIPE TO TUBE STRAIGHT ADAPTER, AIR BREATHING HOSE, WASHER, ROTARY VACUUM PUMP UNIT, FLUID FILTER ELEMENT, SLEEVE SPACER, RUBBER FEET, PLAIN ENCASED SEAL & CLOSE TOLERANCE BOLT.
906 $ 1 LOT (1891)APPRX. AEROSPACE ITEMS. INCLUDES: V-BLOCK, LINEAR ACTUATING CAP, SANDER GRINDER, FLAT WASHER, SHEAR BOLT, SOLID RIVET, TORQUE WRENCH 2/ 8"SQ, CALIBRATION WEIGHTS, CROSS TEE & NOZZLE.
907 $ 1 LOT (1721)APPRX. AEROSPACE ITEMS. INCLUDES: RETAINING RING, SLEEVE BUSHING, ROD END PLAIN BEARING, SELF-ALIGNING PLAIN BEARING, TRAVELING WAVE TUBE & TUNABLE OSCILLATOR.
909 $ 1 LOT (532)APPRX. AEROSPACE ITEMS. INCLUDES: O-RING, SLEEVE SPACER, BOSS REDUCER, CONDUCTOR SPLICE, LOCK WASHER, OIL TANK CAP, SHEAR BOLT, MACHINE BOLT, NON-METALLIC HOSE, GENTEX GOGGLES, EYE BOLT, RUBBER STRIP & SHOCK WRENCH HANDLE.
952 $ 1 LOT (1) TRIWALL OF MAINTENANCE PARTS, BATCH LOT, INCLUDES: INCANDESCENT LAMP, POWER TRANSFORMER, ELECTROLYTIC FIXED CAPACITOR, DIODE SEMICONDUCTOR DEVICE, AUDIO FREQUENCY TRANSFORMER, CARTRIDGE FUSE, AND MORE
954 $ 1 LOT (1) TRIWALL OF MAINTENANCE PARTS, BATCH LOT, INCLUDES: SLEEVE BUSHING, RIGID CONNECTING LINK, SPUR GEAR, LINEAR-ROTARY MOTION ROLLER, UNIVERSAL JOINT YOKE, BALL JOINT, MECHANICAL DRIVE HOUSING, ABRASIVE WHEEL, AND MORE
955 $ 1 LOT (1) TRIWALL OF MAINTENANCE PARTS, BATCH LOT, INCLUDES: WELDED CHAIN, METAL TUBE ASSSEMBLY, FIRE EXTINGUISHER CONTROL ASSEMBLY, INDUSTRIAL SPECTACLES, O-RING, AIR DUCT HOSE, FLUID FILTER ELEMENT, AND MORE
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 4 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
958 $ 1 LOT 1 BOX OF MAINTENANCE PARTS, BATCH LOT, INCLUDES: METALLIC TUBE, TUBE FITTING PLUG, STRAIGHT TUBE ADAPTER, WASTE DRAIN, TAIL PIECE, PACKING NUT, HEATING ELEMENT, STRAINER ELEMENT, FAUCET STEM, BOSS NIPPLE, PIPE ELBOW, PLUNGER, AND MORE.
1001 $ 1 LOT (97) APPROX AIR DUCT HOSES P/ N: AD778-08B79
1002 $ 1 STEWART AVIONICS HYDRAULIC FILLER & PRESSURIZATION UNIT, SN: 424560, P/ N: E10385
1003 $ 1 KECO INDUSTRIES MDL FDECU-3 FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT, SN: 992450, HFC-134A, HRS: 470, P/ N: 9454100-3
1004 $ 1 KECO INDUSTRIES MDL FDECU-3 FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT, SN: 990821, HFC-134A, P/ N: 9454100-3
1005 $ 1 KECO INDUSTRIES MDL FDECU-3 FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT, SN: 990689, HFC-134A, P/ N: 9454100-3
1006 $ 1 KECO INDUSTRIES MDL FDECU-3 FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT, SN: 992272, HFC-134A, P/ N: 9454100-3
1007 $ 1 KECO INDUSTRIES MDL FDECU-3 FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT, SN: 990685, HFC-134A, P/ N: 9454100-3
1008 $ 1 KECO INDUSTRIES MDL FDECU-3 FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT, SN: 000895, HFC-134A, P/ N: 9454100-3
1010 $ 1 LOT (4) ELECTRICAL MOUNTING BASES & CYLINDER EXTENSION
1011 $ 1 LOT (5) MCDONNELL DOUGLAS AIRCRAFT MAINTENANCE KIT P/ N: RE768230001-1
1012 $ 1 LOT (2) DELTECH ENGINEERING MDL 5N12 COMPRESSED AIR PURIFICATION SYSTEM & ROBERTSON AVIATION BLOCK & TACKLE, SN: DOM 02/ 03, P/ N: 1T765ASSYHM0125-200-11
1013 $ 1 DEUTSCHLITE AIRCRAFT MAINTENANCE TOOL KIT P/ N: DAT02AEFKT4005
1014 $ 1 LOT (2) E-SYSTEMS ANTENNA SELECT CONTROLLER P/ N: 401-40741-04 & FXC MDL TTU-415/ E ENVIRONMENTAL TEST SET P/ N: 811-00148
1015 $ 1 LOT (2) VISUAL INFORMATION INSTITUTE MDL 1203M TEST PATTERN GENERATOR & ARCO ELECTRONICS CAPACITORS P/ N: 7907233
1017 $ 1 LOT (2)RFL INDUSTRIES MDL 2470-350MAGNET CHARGER & KEARFOTT TEST PANEL P/ N: KT426206
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 5 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
1019 $ 1 LOT (3) BOEING ELECTRICAL CHASSIS P/ N: 3A768ASSY443-50200-2
1021 $ 1 WESTERN RESERVE ELECTRONICS MDL PP-6241/ U BATTERY CHARGER, SN: 736
1022 $ 1 LOT (2) PARKER HANNIFIN OVERBOARD RELIEF VALVES, P/ N: 7720125-101
1023 $ 1 LOT (2) PARKER HANNIFIN OVERBOARD RELIEF VALVES, P/ N: 7720125-101
1024 $ 1 LOT (23) APPROX CENTRIFUGAL & IMPELLER FANS
1027 $ 1 LOT (29)APPROX ELECTRICAL HEADSETS & HELMET SUSPENSION P/ N: 10114884-101
1028 $ 1 LOT (19) APPROX CONSOLIDATED DEVICES POWER TORQUE, MCDONNELL DOUGLAS TORQUE WRENCH ADAPTERS P/ N: 17G130068-1, AEROQUIP STRAIGHT TUBE ADAPTERS P/ N: 0988-110 & PULLER ADAPTERS
1029 $ 1 LOT (11) APPROX POWER SUPPLIES & VOLTAGE REGULATOR
1033 $ 1 LOT (193) APPROX SYNCHRO CLAMPS P/ N: 10211-1, LOOP CLAMPS, ELECTRO NATIONAL STEPPING SWITCHES P/ N: 54208/ 9000108 & ELECTRICAL MOUNTING BASE, P/ N: MT4626
1034 $ 1 LOT (78) APPROX SPEED GEAR ASSEMBLIES P/ N: 2468246-F, INSULATION TAPE & AC MOTORS
1035 $ 1 LOT (1890) APPROX SLEEVING INSULATION, ADHESIVE TAPE, NONMETALIC BUSHINGS, SEALS & NONMETALLIC HOSES
1036 $ 1 LOT (165) APPROX BOWER TAPERED ROLLER BEARING P/ N: 39585/ 39520
1039 $ 1 LOT (2) PARKER HANNIFIN OVERBOARD RELIEF VALVES P/ N: 7720125-101
1040 $ 1 LOT (2) PARKER HANNIFIN OVERBOARD RELIEF VALVES P/ N: 7720125-101 & 7720152-101
1041 $ 1 LOT (16) C-17 AIRCRAFT MAINTENANCE FIXTURES P/ N: 17G130007-1
1042 $ 1 LOT (130) APPROX MOUNTING BRACKETS, DOOR SEALS, ACCESS DOORS, OBSERVATION WINDOW & AIR CIRCULATOR VENTILATORS
1043 $ 1 LOT (2) ALFRED TEVES BRAKE PRESSURE PRESSURE GAGE PANELS & HUGHES AIRCRAFT AN/ PRC-104(B) (V)1 RADIO SET
1044 $ 1 LOT (168) APPROX KRAUS NAIMER ROTARY SWITCHES P/ N: CHR-10
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 6 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
1045 $ 1 LOT (44) APPROX BREN-TRONICS BATTERY TERMINAL ADAPTERS P/ N: BTA 70413
1046 $ 1 LOT (3) LOCKHEED BATTERY CHARGERS P/ N: 68346490-009
1047 $ 1 LOT (3) IMC MAGNETICS CORP VANEAXIAL FANS P/ N: BC3820V-1
1048 $ 1 LOT (17) APPROX RECOVERY ENGINEERING DESALINATORS
1049 $ 1 MAINTENANCE PLATFORM 10' X 29'
1050 $ 1 LOT (41) APPROX 5/ 8" NONMETALLIC HOSE ASSY P/ N: MS52103Z121270R
1051 $ 1 MAINTENANCE PLATFORM 10' X 29'
1052 $ 1 MAINTENANCE PLATFORM 10' X 29'
1053 $ 1 LOT (2) AN/ APQ-99/ 172 PROGRAMMABLE POWER SUPPLY TEST PANEL & IFF ANTENNA TEST ACCESSORY KIT
1054 $ 1 ENERPAC MDL WMT40 HYDRAULIC BENDER
1056 $ 1 RAYTHEON HOIST SUPPORT BOOM P/ N: 9032590-10
1057 $ 1 MAINTENANCE PLATFORM 10' X 29'
1058 $ 1 MAINTENANCE PLATFORM 10' X 29'
1059 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0090, P/ N: 3308000-500
1060 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0103, P/ N: 3308000-500
1061 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0087, P/ N: 3308000-500
1062 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 1003, P/ N: 3308000-500
1063 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0046, P/ N: 3308000-500
1064 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 1043, P/ N: 3308000-500
1065 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0043, P/ N: 3308000-500
1066 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0005, P/ N: 3308000-500
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 7 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
1067 $ 1 INTERSTATE ELECTRONIC OSCILLOSCOPE & DIGITAL READOUT UNIT, SN: 0036, P/ N: 3308000-500
1068 $ 1 LOT (3) HYDRAULIC TECHNOLOGY PNEUMATIC CONTROL CONSOLES P/ N: 9601
1069 $ 1 LOCKHEED DATA RETRIEVAL UNITS, SN: 1027, P/ N: 4V13000-103E
1070 $ 1 LOCKHEED DATA RETRIEVAL UNITS, SN: 1027, P/ N: 4V13000-103E
1071 $ 1 LOCKHEED DATA RETRIEVAL UNITS, SN: 015, P/ N: 4V13000-103E
1072 $ 1 LOCKHEED DATA RETRIEVAL UNITS, SN: 1063, P/ N: 4V13000-103E
1073 $ 1 LOT (3) LOCKHEED CENTRAL MULTIPLEXER ADAPTERS, P/ N: 2595F0161-4
1074 $ 1 LOT (125) APPROX ELECTRICAL MOUNTING BASES, PREFORMED PACKINGS, ACCESS COVERS, CABLES, POWER MODULES & TRANSFER DRUM SHEETS
1075 $ 1 LOT (2) PULLER END CONNECTORS P/ N: 24-52701
1076 $ 1 LOT (2) HYDRAULIC TECH PNEUMATIC BAG LIFT CONTROL CONSOLE, P/ N: LDEE92-12
1200 $ 1 CONDIESEL AIRCRAFT CARGO LOADING TRUCK P/ N: X11972-P-5785 DIESEL ENGINE 25000 LB CAPACITY
1300 $ 1 MAINTENANCE PLATFORM, AIRCRAFT. HYDRAULIC ADJUSTMENTS, 4 CASTER WHEELS. LIFT HEIGHT: 13' TO 20'. LOAD CAPACITY: 1500 LBS. USED FOR AIRCRAFT GROUND SERVICING EQUIPMENT. BUYER LOAD. NO EQUIPMENT OR PERSONNEL ARE AVAILABLE TO ASSIST LOAD OUT AT THIS SITE.
1301 $ 1 DAVEY COMPRESSOR CO. MODEL: 11M125RPDQ, TYPE: MC-7, DIESEL ENGINE DRIVEN, AIR COMPRESSOR. PINTLE HOOK TRAILER MOUNTED, 1213 HOURS.
1302 $ 1 DAVEY COMPRESSOR CO. MODEL: UNKNOWN, SN: 934473, DIESEL ENGINE DRIVEN AIR COMPRESSOR. PINTLE HOOK TRAILER MOUNTED. 334 HOURS.
1303 $ 1 BARNES PUMP, MODEL: US403 O HOUD-1, SN: 76978-0020, 250 GPM @ 260 FT, CENTRIFUGAL PINTLE HOOK, TRAILER MOUNTED, DIESEL ENGINE DRIVEN, RAW WATER PIPELINE PUMPING UNIT. 12 HOURS.
1304 $ 1 NEAL MACHINE CORP. 10 TON, TRIPOD JACK. MODEL UNKNOWN.
1305 $ 1 NEAL MACHINE CORP. 10 TON, TRIPOD JACK. MODEL UNKNOWN.
1306 $ 1 NEAL MACHINE CORP. 10 TON, TRIPOD JACK. MODEL UNKNOWN.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 8 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
1307 $ 1 COLJAK, AVIATION JACK. CAPACITY UNKNOWN. MODEL/ SN UNKNOWN.
1308 $ 1 MAINTENANCE PLATFORM, MFG/ MODEL UNKNOWN. MISSING ID PLATE. *BUYER LOAD, BY APPOINTMENT ONLY. *
1309 $ 1 P. S. I. MOBILE PRODUCTS, AIRCRAFT TOW TRUCK. DODGE CHASSIS, VIN: 1B6LE368LS724511. MFG JAN 1989. MILES: 1243, HOURS: 2462. POWERED BY DODGE CUMMINGS, 6 CYLINDER DIESEL ENGINE, AUTOMATIC TRANSMISSION. MANY PARTS HAVE BEEN REMOVED FROM ENGINE AND CAB. KEY IS NOT AVAILABLE. BUYER LOAD.
1310 $ 1 FORD CUSTOM F350 CHASSIS, VIN: 2FDJF37EBCB21344, AIRCRAFT TOW TRUCK. MILES: 46357, HOURS: 5678. POWERED BY 6 CYLINDER GASOLINE ENGINE, AUTOMATIC TRANSMISSION. KEY IS AVAILABLE. DUAL REAR WHEEL AXLE, 4 TIRES FLAT. DRIVER'S SIDE DOOR DAMAGED. BUYER LOAD.
1508 $ 1 LOT (1)TRIWALL OF AEROSPACE MAINTENANCE ITEM INCLUDING: HAND SEAL PARTS KIT, SLEEVE BUSHING, SEAL PARTS KIT, DIRECT CURRENT MOTOR, SPRING RESILIENCY TESTER, POWER SUPPLY, RADIO FREQUENCY CABLE, ELECTRICAL TIE DOWN STRAP.
1509 $ 1 LOT (1)TRIWALL OF AEROSPACE MAINTENANCE ITEM INCLUDING: FLOW CONTROL THERMOSTAT, PIPE NIPPLE, ANGLE VALVE, POWER TRANSFORMER, HAND ASSEMBLY VALVE, FLUID FLOW RESTRICTOR, FREQUENCY HOUSING COVER ASSEMBLY, RECEPTACLE CONNECTOR, MOUNTING BAR, GASKET, FLYWEIGHT ASSEMBLY, TEST SET SUBASSY, LUG TERMINAL, REACTOR, CAPACITOR ASSY, ELECTRICAL TERMINAL, SHIELD, TRANSISTOR, SEMICONDUCTOR DEVICE, FIXED CAPACITOR, ELECTRICAL CONNECTOR BACKSHELL, ELECTROMAGNETIC RELAY, TUBE-AXIAL FAN, JACK ASSY.
1510 $ 1 LOT (1)TRIWALL AEROSPACE MAINTENANCE ITEM INCLUDING: REMOTE CONTROL LEVER, PROPELLER BALANCING KIT, FLANGE ELBOW, PLAIN STUD, GASKET, CATERPILLAR MOTOR.
1512 $ 1 LOT (1)TRIWALL AIRCRAFT EQUIPMENT INCLUDES: SEAL NUT PIPE, CONTACT ELECTRICAL, GAGE LIQUID, INDICATOR LIQUID, SHIELD TEST, ADAPTER CURING FIBER OPTIC, SEMICONDUCTOR DEVICES, PIN STRAIGHT HEADED, BOLT FLUID PASSAGE, ADAPTER STRAIGHT, BLADE SAFETY RAZOR DOUBLE EDGE, NUT PLAIN HEXAGON, STRAINER BUCKET, TERMINAL BOARD, WIRE ROPE ASSY, ADAPTER CONNECTOR, THERMAL CUT OFF, GASKET, SPRING HELICAL COMPRESSION, TRANSISTORS, COVER DIAL INDICATOR, BACK SHELL ELECTRICAL, INDICATOR ASSY, SHIELDING GASKET, SEAL CIRCULAR, SWITCH PUSH, RECTIFIER SEMICONDUCTOR, HOLDER THERMOSTAT, RETAINER SERVO PIVOT, PACKING NUT, CAPACITOR, WASHER FLAT, CAP CYLINDER, SWITCH PUSH PULL.
1513 $ 1 LOT (1)TRIWALL AIRCRAFT EQUIPMENT INCLUDES: PRESSURE REGULATOR, NONMETALLIC CHANNEL, FIXED ELECTROLYTIC CAPACITOR, TRANSFORMER ASSY, FIXED WIRE WOUND RESISTOR, TERMINAL BOARD, SEMICONDUCTOR DEVICE, STRAIGHT TUBE ADAPTER, TRANSISTOR, COVER, PUMP PARTS KIT, TUBE-AXIAL FAN, TUBE ELBOW, ELECTRICAL CLIP, ELECTRICAL PLUG CONNECTOR, HEAD ASSY, POWER SUPPLY SUBASSEMBLY, CONNECTOR RECEPTACLE, ELECTRICAL CONNECTOR COVER, TERMINAL LUG, ELECTRONIC SHIELDING GASKET, REGULATING VALVE, ACTUATING CYLINDER, GASKET.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 9 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
1514 $ 1 LOT (1) TRIWALL OF AEROSPACE MAINTENANCE ITEM INCLUDING: PREFORMED PACKING ASSORTMENT, LIQUID SAMPLER, LIQUID TRANSMITTER, OXYGEN INDICATOR, ELECTRICAL CONNECTOR PLUG, TRANSISTOR, ELECTRIC MOTOR COVER, TRANSFER PARTS KIT, REACTOR-VARISTOR, PUMP DIAPHRAGM, CONNECTOR RECEPTACLE, STARTER AND PUMP COVER, FREQUENCY CONVERTER, SEAL RING, ELECTRICAL CONTACT KIT, RECTIFIER, ELECTRICAL CONTACT, PAWL, HEXAGON HEAD SCREW CAP, STUD RETAINER PLATE, TRANSISTOR, RADIO FREQUENCY SWITCH, LUG TERMINAL, TRANSISTOR, RADIO FREQUENCY CABLE ASSY, RING ASSY, TRACK LUBRICATOR, ELECTRICAL HEAT SINK, MECHANICAL FIXED MOUNT TACHOMETER, GASKET SET, VALVE DISK, ROTARY PUMP, GASKET AND SEAL KIT, GASKET.
1515 $ 1 LOT (1) TRIWALL OF AEROSPACE MAINTENANCE ITEM INCLUDING: BUSHING, LIQUID QUANTITY TRANSMITTER, SENDING UNIT, SPEEDOMETER, VOLTAGE REGULATOR, PRESSURE TRANSMITTER, PRESSURE DIAL GAGE, METER, MECHANICAL FIXED MOUNT TACHOMETER, SHAFT ASSY, FLOW CONTROL THERMOSTAT, STOP AND SPRING ASSY, LIQUID QUANTITY INDICATOR, PRESSURE INDICATOR, BALL VALVE, SOLID RUBBER SHEET (RED AND BLACK), COMPRESSOR CYLINDER HEAD, CAPACITOR PUMP MOTOR.
1516 $ 1 LOT (4)TRILECTRIC INDUSTRIES BATTERY CHARGER INPUT: 110V, 60HZ, 25AMPS. OUTPUT: 12/ 24V, 60AMPS.
1600 $ 1 LOT(17)AEROSPACE ITEMS INCLUDING CATERPILLAR INC. HOUSING ASSEMBLY, SMITH'S AEROSPACE COUPLING HALF, SHAFT, SERVOVALVE, HYDRAULIC, HAMILTON STANDARD SEPARATOR, WATER, AIR, US ARMY AVIATION LIGHT SET, OPERATION, DISTRIBUTION BOX, BRUCE INDUSTRIES LIGHT, EXTENSION
1601 $ 1 LOT(25)VALVE LINEAR DIRECT INCLUDING(7EA)PARKER MDL-60650-98, PN-0142(2EA)REAL TIME LAB. PN-19200(16EA)US ARMY TANK COMMAND, PN-2718362
1602 $ 1 LOT(19) BAG, CARGO, AERIAL DELIVERY(OLIVE DRAB)COTTON DUCK MATERIAL, SQUARE SHAPE, COLLAPSIBLE, 232 IN. LG OPENED AND 211 IN. W OPENED
1603 $ 1 LOT(24) BAG, CARGO, AERIAL DELIVERY(OLIVE DRAB)COTTON DUCK MATERIAL, SQUARE SHAPE, COLLAPSIBLE, 232 IN. LG OPENED AND 211 IN. W OPENED
1604 $ 1 LOT(21) BAG, CARGO, AERIAL DELIVERY(OLIVE DRAB)COTTON DUCK MATERIAL, SQUARE SHAPE, COLLAPSIBLE, 232 IN. LG OPENED AND 211 IN. W OPENED
1605 $ 1 LOT(12)STEWART-WARNERSOUTH WIND CORP, CAGE-78385, PN-MODIFIED G706017
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 10 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
1606 $ 1 LOT(32)JAMAICA BEARING, ROLLER MIL-P-197, MFR-60380
1700 $ 1 TUG MA50-4, TOW TRACTOR AIRCRAFT YEAR 95, FOUR CYLINDERS ENGINE HOURS 2871. LOCATED AT HUNTERS ARMY BASE, BUYER LOADS NO VIEWING OR LOADING ASSISTANCE
1701 $ 1 CLARK TOW TRACTOR AIRCRAFT 6 CYLINDERS GAS ENGINE. LOCATED AT HUNTERS ARMY BASE, BUYER LOADS NO VIEWING OR LOADING ASSISTANCE
1975 $ 1 LOT (2)AIRCRAFT EQUIPMENT INCLUDING: LEAK TEST FIXTURE FLOW METER NO DATA TAG, HYDRAULIC CHECKOUT TELEDYNE SPRAGUE SERIAL #5418C W/ AUTOGENOUS BLEED PANEL.
1976 $ 1 LOT (2)WINSMITH MDL 10MCVD GEAR ASSEMBLY SPEED DECREASER, INPUT RPM 1800, INPUT HP1. 5, RATIO 7. 5
2000 $ 1 LOT (3) IRWIN CO, MDL UNKN, SN: 5736, TAP-DRILL SET.
2001 $ 1 LOT (179) PCS INCLUDE (42) MFR, MDL UNKN, MAGNETIC PIPE PLUGS. (48) STRAIGHT PIPE ADAPTERS. (56) ELBOW HOSES. (27) ELBOW PIPE. (8) MIL-B- TYPE 1 ELECT CONNECOTE PLUG. (2) STRAIGHT TUBE ADAPTER. (1) POWER TRANSFORMER.
2002 $ 1 MFR, MDL UNKN, SN: 4137, VALVE ASSEMBLY UNIT.
2003 $ 1 LOT (2) ENERGY TECHNOLOGIES INC, MDL: ETI 10003, SN: 0003F & 9004, POWER DIST UNIT. INPUT 100/ 120 V, 50/ 60 V, 20 AMPS. OUTPUT 100/ 125 V, 50/ 60 HZ, 20 AMPS.
2004 $ 1 LOT (11) PCS INCLUDE (1)LUDLOW CO, MDL: W44, SN: 12339, WIRING HARNESS ASSEMBLY. (10) WBV, MDL UNKN, SN: 120392, ELECTRICAL LEADS WIRING.
2005 $ 1 FOSS-BROWN INC, MDL UNKN, SN; 0449984, CHAIN ASSEMBLY & HOOK, 3/ 4-20 MM.
2006 $ 1 FOSS-BROWN INC, MDL UNKN, SN: 0449983, CHAIN ASSEMBLY & HOOK, 3/ 4 - 2 MM.
2007 $ 1 GAYMORE, MDL: MTA-4700, SN: J98048, MEDI-THERM HYPER/ HYPOTHERMIA, 110 V, 50/ 60 HZ, 11. 8 AMPS. POWERS-UP.
2008 $ 1 LOT (9) US JACK CO, MDL & SN UNKN, HYDRAULIC HAND JACK, 3-TON CAPACITY.
2009 $ 1 LOT (9) US JACK CO, MDL & SN UNKN, HYDRAULIC HAND JACK, 3-TON CAPACITY.
2010 $ 1 LOT (13) AMP, MDL: DLA900, SN: 845102, PULSE TRANSFORMERS.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 11 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
2011 $ 1 LOT (13) AMP, MDL: DLA900, SN UNKN, PULSE TRANSFORMER.
2012 $ 1 LOT (278) PCS INCLUDE (180) SUNBANK ELECT, MDL:8849, CABLE CLAMP ADAPTER. (50) MFR, MDL UNKN, ELECTRICAL CONTACT, PART # 8128029P3. (48) MFR, MDL UNKN, ELECTRICCAL PLUG CONNECTORS.
2013 $ 1 LOT (36) APPROX VICTAULIC, MDL: 77, SN UNKN, PIPE COUPLING CLAMPS.
2014 $ 1 MFR, MDL UNKN, DISTRIBUTION BOX, 120 V, 70 AMPS, 12 OUTLETS.
2015 $ 1 MFR, MDL UNKN, DISTRIBUTION BOX, 120 V, 70 AMPS, 12 OUTLETS.
2016 $ 1 MFR, MDL UNKN, DISTRIBUTION BOX, 120 V, 70 AMPS, 12 OUTLETS.
2017 $ 1 MFR, MDL UNKN, DISTRIBUTION BOX, 120 V, 70 AMPS, 12 OUTLETS.
2018 $ 1 MFR, MDL UNKN, DISTRIBUTION BOX, 120 V, 70 AMPS, 12 OUTLETS.
2019 $ 1 FEEDER SYSTEM ELECT, MDL:M100, 120/ 208 V, 100 AMPS, 300 AMPS, FIELD UNIT.
2020 $ 1 SPECIAL UNIVERSAL ADAPTER, MDL: SUA 60/ 40, 120/ 208 V, 40/ 60 AMPS, PHASE A, FIELD UNIT.
2022 $ 1 LOT (10, 000) FT, (20) SPOOLS = 500 FT (EA), JANOR WIRE AND CABLE, SPECIAL PURPOSE ELECTRICAL CABLE.
2023 $ 1 LINE MAN'S TOOL KIT, MDL UNKN, INCLUDES SLEDGE HAMMER, HAND SAW, SCREW DRIVERS, HAMMER, WORK BELT.
2024 $ 1 LINE MAN'S TOOL KIT, MDL UNKN, INCLUDES SLEDGE HAMMER, HAND SAW, SCREW DRIVERS, HAMMER, WORK BELT.
2025 $ 1 LINE MAN'S TOOL KIT, MDL UNKN, INCLUDES SLEDGE HAMMER, HAND SAW, SCREW DRIVERS, HAMMER, WORK BELT.
2026 $ 1 LINE MAN'S TOOL KIT, MDL UNKN, INCLUDES SLEDGE HAMMER, HAND SAW, SCREW DRIVERS, HAMMER, WORK BELT.
2027 $ 1 LINE MAN'S TOOL KIT, MDL UNKN, INCLUDES SLEDGE HAMMER, HAND SAW, SCREW DRIVERS, HAMMER, WORK BELT.
2028 $ 1 REPAIRMAN'S TOOL KIT, MDL UNKN, INCLUDES ALLEN WRENCHES, SMALL RODS EAR PLUGS, RED BOX.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 12 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
2029 $ 1 AMERICAN ROLLER BEARING CO, MDL UNKN, INDUSTRIAL BEARING ROLLER CYLINDER.
2030 $ 1 AMERICAN ROLLER BEARING CO, MDL UNKN, INDUSTRIAL BEARING ROLLER CYLINDER.
2031 $ 1 AEROQUIP, MDL UNKN, SWAGING TOOL KIT WITH HYDRAULIC PUMP, PORTABLE GREEN CASE.
2032 $ 1 LOT (2) PC INCLUDES (1) URDC, MDL: 2400A-2, HIGH VOLTAGE BATTERY CHARGER. (1) TECA, MDL: AHP-1200X, COOLING ASSEMBLY.
2034 $ 1 CULTER-HAMMER, MDL UNKN, POWER DISTRIBUTION PANEL, PROTECTION PLUS, 60 HZ, 120/ 240 V, 1 PH.
2035 $ 1 BELLOWS, MDL UNKN, EXPANSION JOINT, PN: 22820149.
2036 $ 1 LOT (3) LUDLOW CORP, MDL UNKN, BLACK SPANNER WRENCH SETS.
2037 $ 1 LOT (30) C&M CORP, MDL: AWM STYLE 2960, ELECTRICAL LEADS, 60 C, 30 V.
2038 $ 1 LOT (2) ELECTROMAGNETIC RELAY, MDL UNKN, 28 VDC, TYPE II COIL, 200 AMPS.
2039 $ 1 ASHLAND ELECT PRODUCTS, MDL UNKN, ALTERNATING MOTOR, THERMALLY PROTECTED, RPM 5925.
2040 $ 1 LOT (3)DETROIT DIESEL CORP, MDL UNKN, HELICAL GEARS.
2041 $ 1 LOT (3) CONTAINER SERVICE INC, MDL: M0851, COMPRESSION TESTERS.
2043 $ 1 LOT (24)PCS MDL: MIL-16DT, POWER SUPPLY ADAPTERS, SWITCHABLE, 110/ 240 V.
2050 $ 1 LOT (10) FREED TRANSFORMER CO, MDL: 35699, POWER TRANSFORMER.
2051 $ 1 LOT (6) PCS US MILITARY, MDL UNKN, CAGE: 56161, RATCHET STRAP ASSEMBLY.
2052 $ 1 LOT (2) TRUE TIME DIV. MDL: 486DC, SN: 2075 & 879, SYNCHRO CLOCK SYSTEM.
2053 $ 1 LOT (2) TRUE TIME DIV, MDL: 486C, SN: 2116 & 2261, SYNCHRO CLOCK SYSTEM.
2054 $ 1 LOT (2) TRUE TIME DIV, MDL:486DC, SN: 947 & 1833, SYNCHRO CLOCK SYSTEM.
2055 $ 1 CAT PUMP, MDL: 277, SN UNKN, CENTRIFUGAL PUMP.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 13 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
2056 $ 1 LOT (2) CAT PUMP, MDL: 277, SN UNKN, CENTRIFUGAL PUMP.
2057 $ 1 CAT PUMP, MDL: 277, SN UNKN, CENTRIFUGAL PUMP.
2058 $ 1 CAT PUMP, MDL: 277, SN UNKN, CENTRIFUGAL PUMP.
2059 $ 1 CAT PUMP, MDL: 277, SN UNKN, CENTRIFUGAL PUMP.
2060 $ 1 LOT (27) PCS INCLUDE (13) GE, MDL: F101R, CEILING LAMP HOLDER WITH PULL-CHAIN SWITCH. (10) ADVANCE TRANSFORMER, MDL: VSM-175 BALLAST, 277 V, 60 HZ, 350 AMPS. (4) WAGNER, MDL: 6015, SN UNKN, SEALED BEAM HEADLIGHT, 12 V.
2061 $ 1 LOT (12) PC INCLUDE (1) HITEK, MDL: VR15303, SN: 2116, VOLTAGE REGULATOR. (11) MFR UNKN, MDL: C15289, SN:72149, POWER TRANSFORMER.
2062 $ 1 LOT (17) PCS INCLUDE (15) A&A OF PA, MDL, SN UNKN, ELECTRIC CONNECTOR PLUGS. (2) CPA CO, MDL: 5-A1-3500, SN UNKN, R. P. M. ELECTRICAL INDICATOR.
2065 $ 1 LOT(64) PCS INCLUDE (48) NAVAL SEA SYSTEMS COMMAND, MDL: 53711, SN UNKN, BULKHEAD SLEEVE SPACER ASSEMBLY. (14) TECHFLEX, MDL: 117G, PIPE ELBOW. (2) IPG, MDL: 312A, SLEEVE BUSHING.
2066 $ 1 LOT (7) MONROE WIRE & CABLE CORP, MDL: M24643, SPECIAL CABLE ASSEMBLY.
2067 $ 1 MFR UNKN, MDL: 46123, SN:DTCG40-4600, SPUR GEARSHAFT .
2068 $ 1 LOT (2) UNIVERSAL ELECTRIC CO, MDL: VZ1R007, SN: 123A80330 & 5GA77394, MOTOR & HARNESS, 13. 5 V, 9. 5 AMPS, 3000 RPM.
2069 $ 1 LOT (2)UNIVERSAL ELECTRIC, MDL: VZ1R007, MOTOR AND HARNESS, 13. 5 V, 9. 5 AMPS, 3000 RPM.
2070 $ 1 MFR, MDL UNKN, HEAT RESISTANT FLANGE ELBOW.
2071 $ 1 LOT (2)MFR, MDL UNKN, HEADLESS GROOVED RODS.
2072 $ 1 LOT (2)WEKSLER, MDL UNKN, DIAL INDICATING PRESSURE GAUGES, 0-200 PSIG, ALUMINUM MATERIAL.
2073 $ 1 LOT (1415)THE WIRE MOLD, MDL UNKN, WIRING SYSTEM, ELECTRICAL SUPPORTS.
2074 $ 1 LOT (34) GLENAIR, MDL: 12, CLAMP CABLE ADAPTER, STANDARD CONNECTORS.
2075 $ 1 LOT (54) THE WIREMOLD CO, MDL UNKN, JUNCTION BOXES, WIRING SYSTEMS FROM PANEL BOX TO OUTLET.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 14 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
2076 $ 1 LOT (121) MFR UNKN, MDL: ST010ZZ, NEEDLE ROLLER BEARING.
2077 $ 1 LOT (1) PLT HARDWARE, INCLUDES (155) SOCKET HEAD SCREW KEY. (587) MACHINE SCREWS. (917) HEXAGON SELF-LOCKING NUT.
2079 $ 1 LOT (17) PCS INCLUDES (16) LAMINATED SHIMS. (1) GATE VALVE, COPPER MATERIAL.
2080 $ 1 LOT (44) PCS AEROSPACE HARDWARE INCLUDES (13) STRAIGHT PIN HINGES, 11" LENGTH. (31) HEXAGON SCREW CAPS, 17" LENGTH.
2081 $ 1 LOT (4) PCS INCLUDES (2) SHAFT SEAL ASSEMBLY SPRINGS. (2) RAYCHEM, MDL: 250-S, INSULATION SLEEVING
2082 $ 1 LOT (5) SCHEEBER, MDL UNKN, ANNULAR BALL BEARINGS, STEEL MATERIAL, 1:30 MM.
2083 $ 1 LOT (2) CRENLO INC, MDL: EBL-300, CENTRIFUGAL FANS.
2084 $ 1 LOT (3) BERYL CO, MDL: W-150, BUNG WRENCH, COPPER ALLOY MATERIAL.
2085 $ 1 KEYSTONE VALVE CORP, MDL: R-10, 30 PSI, BUTTERFLY VALVE.
2086 $ 1 LOT (2) PCS INCLUDES (1) SCOT, MDL: EP72, CENTRIFUGAL PUMP, 440 V, RPM 3450. (1) BALDOR, MDL UNKN, PUMP MOTOR, 460 V, THREE PHASE, RPM 5450.
2087 $ 1 LOT (3) PCS MFR, MDL UNKN, SEDIMENT STRAINERS, TWO-WAY BREATHING CONNECTORS.
2088 $ 1 LOT (4) FAIRBANKS MORSE ENGINE, PN: 22820168, PIPE EXPANSION JOINTS.
2089 $ 1 LOT (14) PCS INCLUDES (9) PARKER, MDL: AS-413, 65" HOSE ASSEMBLY. (2) PARKER, MDL: 210-4, 5MM AIR BRAKE, (3/ 16), 3000 PSI. (2) PARKER, MDL: 421-12, 1250 PSI, HOSE ASSEMBLY. (1) MFR UNKN, MDL: III, HOSE ASSEMBLY.
2090 $ 1 WOODWARD INC, MDL: A8241, SN: 2434391, GOVERNOR ASSEMBLY.
2091 $ 1 WOODWARD INC, MDL: A8241, SN: 2498603, GOVERNOR ASSEMBLY.
2092 $ 1 WOODWARD INC, MDL: A8241, SN: 2436830, GOVERNOR ASSEMBLY.
2093 $ 1 WOODWARD INC, MDL: A8241, SN: 2499841, GOVERNOR ASSEMBLY.
2094 $ 1 WOODWARD INC, MDL: A8241, SN: 2433460, GOVERNOR ASSEMBLY.
2095 $ 1 LOT (2) ROPER, MDL: 27, SN: 170794 & 167349, ROTARY FUEL PUMPS WITH ACCESSORIES.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 15 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
2096 $ 1 ROPER, MDL: 27, SN: 170349, ROTARY FUEL PUMP WITH ACCESSORIES.
2097 $ 1 LOT (2) ROPER, MDL: 27, SN: 169641 & 196416, ROTARY FUEL PUMP WITH ACCESSORIES
2400 $ 1 LOT APPROX (21) RUNWAY LIGHT FIXTURES(GENERATOR STATED THAT THE LIGHTS WERE OPERATIONAL UPON TURN IN), MFG, L. L. ROWE COMPANY.
2401 $ 1 LOT APPROX (21) RUNWAY LIGHT FIXTURES(GENERATOR STATED THAT THE LIGHTS WERE OPERATIONAL UPON TURN IN), MFG, L. L. ROWE COMPANY.
2402 $ 1 LOT 4 PLTS, (9) VARIABLE CAPACITORS, (1) CONNECTOR PLUG, (3) ELBOW TUBES, (11) TEE PIPES, (43) ELECTRICAL BRUSHES, (12) ROLL INSULATION SLEEVING, (2) PUSH/ PULL SWITCHES, APPROX (537) INSTRUCTION PLATES, (250) BROKEN PACKAGES, ELECTRICAL WIRING, APPROX (218) INSTRUCTION PLATES, CONNECTOR RECEPTACLES, ELECTRICAL CONTACTS, BACK SHELL ASSEMBLIES, (7) TAIL PIECE UNIONS.
2403 $ 1 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS COMPANY, DEGAUSSING COIL ASSEMBLY.
2404 $ 1 LOT (3) AIRCRAFT TRAFFIC LIGHT ASSEMBLIES, (1) FIRE SUPPORT TEST SET, (9) FIN ADAPTERS, (1) MOUNTING BASE, (75) HEX SCREW CAP, MFG, NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, (8) FILTER ELEMENTS, (1) CLEANER TESTER, MFG, FEDERAL-MOGUL AVIATION INC, (1) HEAT GUN, (5) NIGHT CAP BULBS, (3) CABLE ASSEMBLIES, (1) REACTOR, (1) FLUID TRANSMITTER, (1) DOOR UP LOCK ASSEMBLY, MFG, MCDONNELL DOUGLAS CORPORATION A WHOLLY OWNED SUBSIDIARY OF THE BOEING COMPANY, (1) LEVER ASSEMBLY, (5) CONNECTOR RECEPTACLES, MFG, AMPHENOL AEROSPACE OPERATIONS, (6) TEMPERATURE TRANSMITTERS, MFG, HAMILTON SUNDSTRAND, (21) ELECTRICAL CONTACTS, (32) HOSE ASSEMBLIES, MFG, EATON AEROSPACE.
2405 $ 1 LOT 2 PLTS, (1) PROPELLER BALANCE KIT, MFG, HAMILTON SUNDSTRAND CORPORATION, (1) ENGINE SUPPORT, MFG, GENERAL ELECTRIC COMPANY DIV GENERAL ELECTRIC AIRCRAFT ENGINES, (1) ADAPTER SEAL KIT, MFG, GENERAL ELECTRIC COMPANY DIV GENERAL ELECTRIC AIRCRAFT ENGINES, (1) TURBINE ROTOR GAGE, (3) AIRCRAFT MAINTENANCE FIXTURES, MFG, SMITHS AEROSPACE INC. DBA DIV ELECTRONIC SYSTEMS-GRAND RAPIDS, (1) INSPECTION GAGE SET, MFG, MCDONNELL DOUGLAS CORPORATION A WHOLLY OWNED SUBSIDIARY OF THE BOEING COMPANY, (1) SPANNER WRENCH, (2) ENGINE HOISTING ADAPTERS, MFG, HONEYWELL INTL INC AIRFRAME SYSTEMS DIV DBA ENGINE SYSTEMS & SERVICE, (14) HELICAL GEARS.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 16 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
2406 $ 1 LOT (5) GENERAL DYNAMICS C4 SYSTEM, PP-8190/ G BATTERY CHARGER.
2407 $ 1 AVS, 32 A-30 JG 40 TUG.
2408 $ 1 AVS, 32 A-30 JG 40 TUG.
2900 $ 1 LOT (18) MICHELIN AIRCRAFT TIRE CORP. , AVIATOR MWL-1, TIRE, PNEUMATIC, AIRCRAFT, 15X6. 0-6, CUT 3/ 32 LIMIT.
2901 $ 1 FORD, F350, TRACTOR WHEELED AIR, VIN 2FDJF37E5CCB01498, 1982, 6 CYL GASOLINE ENGINE, AUTOMATIC TRANSMISSION, 4 X 2, 68, 925 MILES LISTED.
3200 $ 1 LOT (1)PLT AEROSPACE EQUIPMENT TO INCL:(2)VACCO INDUSTRIES PN V3D10438-02 FLOW CONTROL VALVE SN 208566-2, (12)MERCEDES BENZ INTERNAL COMBUSTION PISTON
3201 $ 1 LOT (1)PLT HARDWARE TO INCL:(3)PARKER HANNIFIN CORP PN 731522 NON METALLIC HOSE SET TYPE 3B 1/ 2 OUTSIDE DIAMETER A DOT, (6)ANTRIM MACHINE PRODUCTS INC PN 12254278 NOZZLE ASSY, (1)SHINANO TOKKI CORP ELECTRIC MOTOR STARTER SN D043014, (APPROX 93)WEBBING STRAP, (1)EATON CORP PN 78729-1 VALVE ACTUATOR YOKE, (1)AMBAC INTERNATIONAL CORP PN LE90103A LEVEL ASSY, (8)FLUID CONDITIONING PRODUCTS INC PN A-A-52472 FLUID FILTER, (1)EQUIPMENT & SUPPLY INC PN 1C6080G01 PULLER-ROTATOR ADAPTER
3203 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)GE PN 12364055 CONTROL INTERFACE BOX SN 3202, (1)ANTEON CORP PN 6871372-1 SWITCH BOX, (1)SCHAUL CORP BATTERY CHARGER SN 17601 115-230V, 7. 0-3. 5AMPS, 50/ 60 CYCLES, (APPROX 16)BRANCH WIRING HARNESS PN 12293370
3204 $ 1 LOT (9)RAYTHEON COMPANY PN 1719319 COMPASS ROSE PANEL
3205 $ 1 LOT (1)PLT HARDWARE TO INCL:(14)WEATHER RESILIENT MOUNT PN HT2-35, (APPROX 45)FT NONMETALLIC ROUND SECTION SEAL, (APPROX 24)SPX CORP PN 2637 INTERNAL COMBUSTION ENGINE PISTON, (APPROX 3040)O K TOOL & DIE CO INC PN SC-B-444330 RETAINER ASSY, (APPROX 255)WASHER, (12)TE 1/ 2" OUTSIDE DIAMETER SOCKET WELD, (APPROX 1200)PLAIN TAPERED PIN, (APPROX 45)1" BUTT TAIL-PIECE, (APPROX 62)BFM SPECIALTY MINERALS PN 56993 LEAK-PROOF SEAL PLUG, (14)BUD CHASSIS PLAT BOTTOM 8"W X 12"L NATURAL FINISH, (1)HADER INC PN L36260 HYDRAULIC PARTS KIT
3206 $ 1 LOT (APPROX 65)HD ELECTRICAL CONDUIT COUPLING MFR/ PN UNKNOWN
3207 $ 1 LOT (APPROX 47)EDWAL LABORATORIES INC PN R01000500651 SOLID TIRE DIMENSIONS 10" X 5" X 6 1/ 2"
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 17 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3208 $ 1 LOT (APPROX 68)PAULUHN ELECTRIC LANTERN 115V SYM 101. 2
3209 $ 1 LOT (APPROX 15)CROUSE-HINDS AIRPORT LIGHTING PRODUCTS PN 305235 RUNWAY LIGHT
3210 $ 1 LOT (1)PLT HARDWARE TO INCL:(4)RAYTHEON CO PN 3224772-0001 PRESSURE SWITCH, (1)PAPER DIELECTRIC FIXED CAPACITOR, (1)FLOW CONTROL THERMOSTAT, (1)IMO INDUSTRIES INC PN 63056 LIQUID LEVEL SWITCH SN 1129990, (1)ITT PN 89513-75071-1 BUTTERFLY VALVE SN MA11A1145-1 28V, 3 AMPS, (2)ASCO SOLENOID VALVE SN F828723-5 115V/ 60HZ, 16. 7W, PIPE 3/ 4, (2)GEMS SENSORS INC LIQUID LEVEL SWITCH, (1)FEDERAL SINGLA CORP ELECTRIC MOTOR OPERATED SIREN
3211 $ 1 LOT (4)PLTS HARDWARE TO INCL:TROY TUBE & MANUFACTURING CO PN 12342748 METAL TUBE ASSY, (APPROX 992)FT REUBEN BURTON INC PN M23053/ 15-102-2 INSULATION SLEEVE, (APPROX 70)SY SOLID RUBBER SHEET, (APPROX 31)THERMAL INSULATION DIMENSIONS 35" X 30 1/ 2" X 40 1/ 2"
3212 $ 1 LOT (2)PLT HARDWARE TO INCL:(3)PHOENIX PRODUCTS CO MDL 1-1000MH-10 LAMP BALLAST, (3)VACCO IND INC PN V3C10218-TA VALVE DISK, (1)HONEYWELL INT'L INC PN 55972-27947-A30A1A1 PRESSURE INDICATOR SN 8707297, (1)TELONIC ENGINEERING CORP MDL TTF-2505-5EE TUNABLE BANDPASS FILTER SN N255-3, (6)PRESTOLITE WIRING HARNESS 13" LONG, (1)MOOG INC PN 005520-03 DRIVE MOTOR, (APPROX 861)ELECTRICAL CAP MFR 80063 PN SC-B-611742-1
3213 $ 1 LOT (3)PLT HARDWARE TO INCL:(APPROX 66)GREASE SEAL ENGRAVED 1A-1020-384-3153 10" DIAMETER, (APPROX 1200)ETA GLOBAL INC PN 12009382 HEADED STRAIGHT PIN, (1)ROLLER BEARING UNIT ENGRAVED 522 16 1/ 2"L X 6 1/ 2"W X 9 1/ 2"H, (1)GROOVE PULLEY DIAMETER 27 1/ 2", (2)ELECTRIC ENGINE STARTER ENGRAVED 63221405-E95 11/ 12, (1)MOV TRI-TEC CO PN 884010-1 ELECTRO-MAGNETIC ACTUATOR DIMENSIONS 14" X 15" X 12 1/ 2"H, (6) HAGGLUND PN CRD001. 230 SOLENOID VALVE ENGRAVED 3874010-8010326-H-MT1580, (1)COVER DIAMETER 35"
3214 $ 1 LOT (2)PLTS HARDWARE TO INCL:(2)CENTRIFUGAL PUMP IMPELLER 9 1/ 2"DIAMETER, (1)WM E WILLIAMS VALVE CORP ANGLE VALVE 285 PSI AT 100 DEGREES FAHRENHEIT, (1)TRAC REGULATOR INC TEMP REGULATING VALVE SN 021249 RANGE 65-95 SIZE 2, (1)CYLINDER VERSATEK CO PN 037-45586-0 CYLINDER ASSY, (1)CYLINDER ASSY PN 339914 DIMENSIONS 30"L X 10"
3215 $ 1 LOT (1)PLT HARDWARE TO INCL:(APPROX 382)THUMBSCREW PN 12273976, (APPROX 458)SHOULDER SCREW PN 122789232, (APPROX 400)MACHINE SCREW PN 1228760, (APPROX 37)HEADED STRAIGHT PIN PN 12379365, (APPROX 150)HEADED GROOVED PIN, (APPROX 575)HEADLESS GROOVED PIN PN 9377056, (APPROX 527)FLAT WASHER PN 2500075-321600
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 18 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3217 $ 1 LOT (2)PLT PRINT OUT UNITS TO INCL:(9)SCI SYSTEMS INC PN 5142000-002 PRINT OUT UNIT, (5)ONBOARD SOFTWARE INC PN 57771001000 MADAR II PRINT UNIT
3218 $ 1 LOT (1)PLT HARDWARE TO INCL:(APPROX 51)GALAXY BEARING CO BEARING PARTS KIT, (14)PLATE SPACER PN 5521131, (APPROX 47)MACHINE THREADING BUSHING ENGRAVED 5520068, (1)RING GAGE
3219 $ 1 LOT (2)PCS SOLENOID VALVES TO INCL:(1)RG LAWRENCE CO INC PN 502NBMWAHP76SNVTB SN S2R0160001 440V, 60HZ, (1)ASCO SOLENOID VALVE SN F124146-6 115V, 60HZ, 20 AMPS
3220 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)EDWARDS PN X20065000 TUBE PIPE FITTING KIT, (APPROX 168)SETSCREW, (APPROX 375)MACHINE BOLT PN 5306-01-194-0588, (APPROX 247)SHIM MFR 53711 PN 5521162, (APPROX 94)SPACER SLEEVE PN 5518470-102, (13)YOUNG ENGINEERING & MANUFACTURING INC PN 88-07503 NON METALLIC GROMMET, (10)FLUID POWER EQUIPMENT CO INC PN EF-1602A-1616
3221 $ 1 LOT (1)PLT HARDWARE TO INCL:(2)TRANSPONDER 24V, (13)SCHOTT CORP PN 67093870 POWER TRANSFORMER 120V, 180HZ, 5 AMPS, (2)POWERMARK PN 5112-26 STATIC POWER INVERTER 12/ 24VDC, 32/ 16A, 60HZ, 250VA, 115VAC, (2)CENTRI CAST CORP ELECTRIC TRANSFORMER 115V, 400HZ, 3. 5AMP
3222 $ 1 BACHARACH DIESEL INJECTION TEST SET
3223 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)CUTLER HAMMER MAGNETIC CONNECTOR 250V, (4)WIRE-PRO INC ELECTRIC CONNECTOR PLUG, (APPROX 214)MAGNETEK INC PN 05P00017-0260 CARTRIDGE FUSE 500V AC-DC, (APPROX 52)ANCRA INTERNATIONAL LLC PN M16377-542438 LIGHT HOLDER, (10)AGASTAT MDL 7012L8BNX ELECTRO-MAGNETIC RELAY SN F0127218, 120-240VAC, 1/ 4HP, 115V, 60HZ, (8)L L ROWE CO PN M24231/ 3-010 ELECTRICAL PLUG CONNECTOR
3224 $ 1 LOT (1)PLT HARDWARE TO INCL:(3)AGASTAT PN 7022AD ELECTRO MAGNETIC RELAY 120V, (11)TABET ROTARY SWITCH ENGRAVED S6202-74290, (APPROX 30)ITT INDUSTRIES INC PN CA3108E36-10SF80ELEC PLUG CONNECTOR, (APPROX 90)POWELL ELECTRONICS INC PN 85-190614-7K ELECTRIC PLUG CONNECTOR, (APPROX 24)DYNALEC CORP PN 62404-250 ELECTRONIC COMPONENT, (3)GENERAL ELECTRIC CO CAPACITORS DIV PN 26F6869FC PAPER DIELECTRIC FIXED CAPACITOR 30UF 1000 VDC, (1)CONNECTOR-SWITCH 30 AMP, 450VAC, 60HZ, 3PH, (1)SPERRY PN 03956-1884068-18 MAGNETIC COMPASS SN 2170
3225 $ 1 HOVAIR TRANSPORTER AIR FILL HOSE PARKER SERIOUS 7092 GST II 1 1/ 2 INSIDE DIAMETER, 38. 1 MM, 200 PSI MAX
3226 $ 1 LOT (2)PLTS (APPROX 270)UNICOR FEDERAL PRISON INDUSTRIES PN SC-D-930691 INTERCONNECTING BOX
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 19 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3227 $ 1 LOT (2)PLTS (APPROX 228)UNICOR FEDERAL PRISON INDUSTRIES PN SC-D-930691A INTERCONNECTING BOX
3228 $ 1 LOT (1)PLT HARDWARE TO INCL:(6)CUTLER HAMMER RELAY ARMATURE, (2)PIONEER SYM 951. 1 PN 10219-101 POWER TRANSFORMER, (3)WARD LEONARD ELECTRIC CO PN 22924-48-2 ELEC CONTACT ASSY, (APPROX 111)PAPER METALLIZED FIXED CAPACITOR 30 UF, 66V, 60HZ, 90C ENGRAVED AEROVOX-H94R6630E28, (APPROX 13)WARD LEONARD ELECTRIC CO PN 19879-10-4 RADIO FREQ COIL
3229 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)HATCH & KIRK INC CYLINDER HONING UNIT PN'S INCLUDE 805889HK, 8343116-HK, 8431587HK, 8068123HK, 8431588HK, (1)CYLINDER PULLER KIT ENGRAVED DR 63/ 56-LNR 2. 3-26 SWL IT, (1)HUTCHINSON INDUSTRIES INC PN P-501 PNEUMATIC MOUNTER AND DEMOUNTER
3260 $ 1 LOT (1)PLT HARDWARE TO INCL:(4)SPECIAL PUMP DIAPHRAGM PN 7688-9, (1)HELICAL GEAR ENGRAVED 114290-T021BA1 B43K21, (1)BEVEL GEAR MFR/ PN UNKNOWN, (1)HARDIE-TYNES CO INC PN 210-179 GEAR SPUR, (1)LANSON ASSOC INC PN 1122F23G01-90099 MATCH BEVEL GEAR SET, (2)FLOWSERVE CORP PN 1S-473-5D-14 BEVEL GEAR
3261 $ 1 LOT (1)PLT FILTERS TO INCL:(3)FLUID FILTERS A-312/ SA-312, 16"L X 6 1/ 2"W, (APPROX 30)DETROIT DIESEL CORP PN 1529641 INTAKE FILTER ELEMENT
3262 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)A E MACHINE WORKS INC PN 0030000JB5-1 VALVE SEAT, (4)GAS EQUIPMENT ENGRAVING CORP PN 76-2873-X56 ANGLE VALVE, (10)EFS AEROSPACE, INC PN 27748 RELIEF CARTRIDGE VALVE, (1)TYCO VALVES CONTROL BUTTERFLY VALVE SIZE 5", (1) SPINDLE ASSY ENGRAVED CH10021-19 1/ 2"L X 9 1/ 2"W, (3)SPINDLE FLINGER ENGRAVED D-D09323-01 14"
3263 $ 1 LOT (APPROX 116)DOME VENT LOT 4682, DIMENSIONS 4 1/ 4"L X 3 3/ 4"W
3264 $ 1 LOT (3)HAND DRIVEN HYDRAULIC PUMPING UNIT ENGRAVED GSN2-P74-180000-20BA03-C-411-099 PRINCE PU-HP-10BW-3. 5GAL
3265 $ 1 LOT (APPROX 148)WARREN MACHINE CO INC PN 508447-10 GUIDE LIGHT
3266 $ 1 LOT (APPROX 117)JOSEPH L CASTELLI PN 4406075 FLUID FILTER ELEMENTS
3267 $ 1 LOT (APPROX 300)RADIO FREQUENCY TRANSFORMER MFR 10001 PN 2899423-3
3268 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)CUSTOM POWER INC MDL 24-2KNT POWER SUPPLY SN 4654 120V, 40-16 AMPS, FREQ 60, (7)JOHNSON CONTROLS PN M13099A-1 ELECTRO-MAGNETIC ACTUATOR, (6)PIONEER MAGNETICS MDL PM2496A-1 POWER SUPPLY SN 265755 115VAC, +15V-25A PENETRATION DEPTH 3/ 16" MAX, (1)BASLER ELECTRIC PN 9032300101 SERIES BOOSTER ASSY SN H00446735
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 20 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3269 $ 1 LOT (1)PLT HARDWARE TO INCL:(14)ANNULAR BALL BEARING PN 131855, (1)HELICAL GEAR ENGRAVED B42M21, (1)DISK VALVE, (4)SELF ROLLER BEARING PN 22230BS-MB
3270 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)HEAT EXCHANGER ASSY, (1)DIMENSIONS UNLIMITED INC MDL MIL-24-3200DQ POWER SUPPLY INPUT 25. 2VDC AT UP TO 160AMPS, OUTPUT 120-240VAC RMS 60HZ, 3200W, (5)POWER DISTRIBUTION PANEL PN 5612413, (2)ELECTRIC SPACE HEATER DIMENSIONS 32"L X 21 1/ 2"W
3271 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)TUBE ALLOY CORP PN 125-10000 MDL 125-CCR NOZZLE FUEL & OIL NOZZLE, (5)FLUID FLOW RESTRICTOR PN 5860287, (4)VACCO IND PN V3D10202-01 VALVE CARTRIDGE 3000PSIG, (3)NEW HAMPSHIRE BALL BEARINGS PN L21420P01 GAS LINK ASSY
3272 $ 1 LOT (1)PLT HARDWARE TO INCL:(8)CUTLER HAMMER PN 42-1459 POWR TRANSFORMER 440V, 60HZ, (1)CUTLER-HAMMER PN 42-1459-18 POWER TRANSFORMER 440V, 60HZ, (4)GE TORARY RELAY 120V, 5AMP, 60 CYCLES, 3PH, (1)POWER TRANSFORMER MFR 53711 PN 5191302 SN 643, 440V, 60HZ, (2)DYNALEC CORP PN 701021-428 ELECTRO MAGNETIC RELAY, (4)BARBER COLEMAN CO PN MA-418-500-0-3 ELECTRO-MAGNETIC ACTUATOR, 120V, 60HZ, 70W, (APPROX 29)L-COM CONNECTIVITY PRODUCTS PN MS3456628-21P, (APPROX 21)BEACH INT'L PN J-D4B ELECTROMAGNETIC RELAY COIL 12VDC, 12 AMP, 28VDC 115-200VAC, 400HZ, (APPROX 16)SEMICONDUCTOR DEVICE ENGRAVED 65783-2N1916
3273 $ 1 LOT (1)PLT HARDWARE TO INCL:(3)THOMAS & BETTS CORP PN 13589A ELECTRIC FOOT SWITCH 10 AMP, 125V, (1)ROTARY SWITCH ENGRAVED M15743/ 9-002, (3)MOTION DEVICES TECHNOLOGY INC PN 112457-8940 ELECTRICAL RESOLVER, (3)AUTOMATIC SWITCH CO PN SA10A/ QN11A1D TEMPERATURE SWITCH, 1/ 8HP, 125VAC, 90W, (APPROX 27)AIRPAX PN 4116002-151 CIRCUIT BREAKER 15 AMPS, 240V, 400HZ, (1)ROTOR CASE, (2)MEA AEROSPACE CO INC PN 928265-3 DUMMY PLUG, (6)B A E SYSTEMS PN 2690802 PROXIMITY SWITCH, (APPROX 30)GREASE CUP PN 317819, (4)SWITCH ASSY PN 1623541, (5)WARD LEONARD ELECTRIC CO PN IC5182C120A3AAAA ELECTRO MAGNETIC RELAY 440V, 60HZ, (1)MAROTTA CONTROLS INC PN 283900 MAGNETIC CONTRACTOR SN 136 3 WAY 2 POSITION, 115V AC, 3 AMP, (1)ORBIT INSTRUMENT CORP PN 20173 SERVO REPEATER SN 470 60VAC 115V, 400HZ, (1)ELECTRO SWITCH CORP PN 8151853048106 SWITCH ASSY, (1)DYNALEC CORP PN N00024-88C-4153 ROTARY SWITCH SN 004 115V, 60HZ
3274 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)STRAIGHT ADAPTER ENGRAVED FC3476-48-188, (2)MFR 0AT62 PN R74604 PACKING RETAINER, (3)STRAIGHT ADAPTER SIZE 2 1/ 2 ENGRAVED 3-74021-2 1/ 2-48, (5)JETT AIRE GROUP INC PN B1A PERMANENT MAGNET, (APPROX 550)SHOULDER SCREW PN 122789231, (3)SHOULDERED SHAFT DIMENSIONS 18 1/ 2"L X 2 1/ 2"W, (3)SLEEVE BUSHING DIMENSIONS 15"L X 9"W
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 21 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3275 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)ROBERTSHAW MDL D-26 REGULATING VALVE SN E02B387 SIZE 1 1/ 4, (1)MFR 90099 PN 470993-02 PLAIN SHOE ASSY, (6)AIR DRY CO OF AMERICA LLC PN 9384 FIN ASSY DIMENSIONS 45 1/ 2"L X 4 1/ 2"W, (1)ITT STANDARD PN COOL SHELL TYPE A SN 97C90011-001 TUBE SIDE 225 SHELL SIDE 225 DIMENSIONS 37 1/ 4"L X 5"W
3276 $ 1 LOT (2)PLTS HARDWARE TO INCL:(10)WARD LEONARD ELECTRIC COMPANY INC PN 22839-13-2 CHUTE ASSY, (APPROX 140)ELECTRICAL PROTECTOR PN 60-34, (1)PG LOCKHEED MARTIN SIPPICAN INC PN 212867-1 PROBE SSXBT 39"L X 3 1/ 4"W, (9)THE SUPPLY HOUSE PN 4684671-2 CONNECTOR PLATE 24" OUT 6" IN, (7)GENERAL DYNAMICS ELEC MOUTING BASE SN 065 SUPPLY 28VDC, 115V, 48-450 CYCLES DIMENSIONS 18" X 16 1/ 2" X 10 1/ 4"H
3277 $ 1 LOT (4)PLT HARDWARE TO INCL:(8)GM PN 9324489 STRAINER ELEMENT, (2)NON-METALLIC HOSE ASSY PN 745581P0410 1 1/ 2" 150 TUBE LINE, (2)STRAINER ELEMENT 15 3/ 4" X 6 1/ 4", (4)UNIROYAL PN 81349 MIL-H-28596 NON METALLIC HOSE ASSY P-809 STEAM 3/ 4 20 MM 250#WP 010684, (1)SEDIMENT STRAINER ENGRAVED E1999600, (1)BASKET STRAINER 25"L X 9 1/ 4"W, (3)TATE ANDALE INC PN 204-18008-H21 STRAINER ELEMENT 34"L X 10"W, (2)GLOBAL PRODUCTS CORP PN SW-CX398-1-M1060004 BARRIER MATERIAL WATER CLASS C-1 60"L X 9 1/ 2"W, (3)FILM TEC CORP MDL SW30-4040 FILTER ELEMENT 39 1/ 2"L X 4"W, (2)INDISTRIAL INSULATI0N GROUP LLC INSULATION SLEEVING 36"L X 16 1/ 2", (4)QUILTED INSULATION ENGRAVED FB4497-DJN0701946 52 1/ 2"L X 17"W
3278 $ 1 LOT (1)PLT HARDWARE TO INCL:(7)HYDRASEARCH & TECHNICAL PRODUCTS CO INC PN ISS-192 REENFORCING SLEEVE, (14)C M P CORP PN LNR90630 CLYINDER SLEEVE, (1)RING SCRUBBER PN D12226
3279 $ 1 LOT (1)PLT HARDWARE TO INCL:(1)COUPLING TUBE ENGRAVED 8703375-01, (APROX 388)MID COAST INDUSTRIES INC PN SSB26-1000-5 RESILIENT MOUNT, (8)STRAIGHT ADAPTER PN 5519960, (4)WAUKESHA BEARINGS CORP PN 000234220-001 GASKET, (12)R-WAY GASKET SUPPLY CO PN P00244NRP GASKET
3280 $ 1 LOT (1)PLT COMPRESSOR PISTON ENGRAVED 220812RD, (1)ALIGMENT GAGE ENGRAVED G52558, (1)PISTON CONNECTING ROD 14"L X 8"W, (4)WAUKESHA BEARINGS CORP PN 000050632000 SEAL ASSY
3281 $ 1 LOT (1)PLT HARDWARE TO INCL:(APPROX 162)SKF USA INC PN 6205-NR-205KGFS10000 ANNULAR BEARING BALL, (1)SKF USA INC PN 23952-C SELF ROLLER BEARING, (9)SHELL BEARING, (APPROX 38)CATERPILLAR SLEEVE BEARING ENGRAVED 1-8N-7769X, (1)BEARING RETAINING PLATE ENRAVED 1143162
3283 $ 1 LOT (1)PLT SWITCHES TO INCL WALTER KIDDIE PN 62142-897567 PRESSURE SWITCH, (3)DRS POWER & CONTROL TECHNOLOGIES INC PN 6981ED175-558 SWITCH ASSY, (1)IMO IND INC FLOW SWITCH 100W, 120-240VAC, (6)ELECTRO SWITCH PN P96S-312BN29 ROTARY SWITCH, (1)PUSH SWITCH, (1)CUTLER-HAMMER PN 6981ED173-352 SWITCH ASSY, (8)OMEGA ENGINEERING INC ROTARY SWITCH ENGRAVED SW1436-6-B-PG-503979100
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 22 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3284 $ 1 LOT (1)PLT HARDWARE TO INCL:(10)NORTHROP GRUMMAN SYSTEMS CORP PN 238885 BELLOWS ASSY, (APPROX 47)STRAIGHT HOSE ADAPTER PN 78401-K2, (APPROX 50)KEX PLAIN NUT, (APPROX 75)MACHINE BUSHING PN A12942-35, (1)KINGSBURY INCPN 127660-4 SHOE ASSY, (2)GE PRESSURE BELLOWS, (1)TUTHILL CORP PN ML4-H26 COUPLING HALF QUICK, (APRROX 16)RESEARCH TOOL & DIE WORK INC PN 1M6SC STUFFING TUBE, (8)NEWPORT NEWS INDUSTRIAL PN 1630314 WEATHER RESILIENT MOUNT, (3)GROOVE CLAMP COUPLING
3286 $ 1 LOT (5)PLTS HARDWARE TO INCL:(8)STAR DYNAMIC CORP TONE SIGNAL ADAPTER SN 1108A, (1)SEAL ASSY ENGRAVED 298317-100, (1)REDUCTIONS BEARING, ENGRAVED 3120-186-7752, A/ B 2224, RGR-390TX8, (1)SYSTEMS & ELECTRONICS INC PN E57481-01 NON METALLIC SPECIAL HOSE, (APPROX 34)GATEWAY SUPPLY CO INC PN 12352558 METALLIC HOSE SIZE 35. 5"L X 3. 5"W, (APPROX 176)METAL TUBE ASSY ENGRAVED 02133 10915096, (APPROX 97)UNICOR FEDERAL PRISON INDUSTRIES INTERCONNECTING BOX, (2)KT GENERAL MOTORS CORP BEARING PARTS KIT ENGRAVED 1-8455666, (5)LAMBDA ELECTRONICS MDL LRS-C-6-R POWER SUPPLY 105-132V, 57-63HZ, 6+VDC, (APPROX 22)CABLE ASSY PN 4220-097-5 16", (1)STANT MFR INC MDL ST270 12270 RADIATOR-RADIATOR CAP TEST KIT 28-30PSI, (1)EDO PN 36020 RECORDER ASSY SWITCH SN 229, (1)PRAGMATICS INC PN 42091 RECORDER ASSY SWITCH SN 23
3350 $ 1 LOT (9)NON-METALLIC HOSE ASSY TO INCL:(8)DURADYNE INC PN 605014MM0600 2" DIAMETER, (1)GOODYEAR PN 40055P0760-01-D-7941 2" DIAMETER
3351 $ 1 KECO IND MDL GH-100 PN M27507-1 TRAILER MOUNTED PORTABLE DUCT TYPE HEATER SN 87080, 100, 000BTUH, 220/ 440V, 3PH, 60HZ, DIMENSIONS 80" X 42" X 49"
3352 $ 1 LOT (2)AIRCRAFT PALLET DOLLEYS DIMENSIONS 133" X 102" X 16", MFR/ MDL UNKNOWN
3353 $ 1 LOT (APPROX 18)CABLE ASSY PN 97403-13229E574 BENDIX PN MS90563-11C CABLE ENDS CABLE 2 1/ 2" DIAMETER
3354 $ 1 LOT (11)NU-TORQUE INC PN 7800-046-100 HYDRAULIC ACTUATOR OPERATING PRESSURE 750PSI, OPERATING TORQUE 3500 IN LB, MAX PRESSURE 900 PSI DIMENSIONS 31" X 11" X 8", VALVE GATE 5 3/ 4"
3355 $ 1 LOT (8)NU-TORQUE INC PN 7800-046-100 HYDRAULIC ACTUATOR OPERATING PRESSURE 750PSI, OPERATING TORQUE 3500 IN LB, MAX PRESSURE 900 PSI DIMENSIONS 31" X 11" X 8", VALVE GATE 5 3/ 4"
3356 $ 1 LOT (8)NU-TORQUE INC PN 7800-046-100 HYDRAULIC ACTUATOR OPERATING PRESSURE 750PSI, OPERATING TORQUE 3500 IN LB, MAX PRESSURE 900 PSI DIMENSIONS 31" X 11" X 8", VALVE GATE 5 3/ 4"
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 23 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3357 $ 1 LOT (3)LIMITORQUE PN 40946 ELECTRO-MECHANICAL ACTUATOR ENGRAVED WTRA-12-4144-010
3358 $ 1 LOT (10)PLTS AEROSPACE EQUIPMENT TO INCL:(1)HUDSON MACHINE TOOL PN 65720-20005-041 ROTARY RUBBER BLADE STAND ASSY DIMENSIONS 88" X 32" X 34", (1)PIELSTIC MAINTENANCE FIXTURES STAND MDL UNKNOWN, DIMENSIONS 71" X 45" X 45", (1)SWESCO INC PN 1C5601-3601YOKE ADAPTER SET SN 019, 8FT X 26", (1)EA DURODYNE INC PN DLA700-87-C-2823 NONMETALLIC HOSE SN 081, 2 1/ 4" DIAMETER, LENGTH UNKNOWN, (1)A CYLINDER ASSY 7" X 45" X 8", MFR/ PN/ SN UNK, (1)NOAH HOWDEN INC PN 723047B VANEAXIAL FAN SN 4207, 7500CFM AT 11. 0 IN H2O STATIC AT 0. 0665 LB/ CU FT, 20. 95 HP AT 3700RPM, (1)RANDALL MFR CO FILLER & PRESSURIZATION HYDRAULIC SYSTEM SN G-7010181, LOW PRESSURE 45 PSI, HIGH PRESSURE 3, 000PSI, DIMENSIONS 36" X 45" X 37", (1)TUXCO MDL TC-60M HYDRAULIC TIRE CONSTRICTOR DIMENSIONS 16. 5" X 4. 5" X 8", (1)SHAFT SEAL ASSY PN US-43275-4 ENGRAVED STERN TUBE SEAL ASSY IN ACCORDANCE W/ JOHN CRANE TYPE MX9 WATER LUB INBD SEAL FOR 22. 75" OUTSIDE DIAMETER SHAFT, 6289-E508
3359 $ 1 JOHN CRANE PN US-70455 SHAFT SEAL ASSY ENGRAVED 7H5330-01-279-7336 TYPE , X9-N00104-88-C-0848 INCLUDES SEALING STRIPS, CORD, INTERLAYER M79579-H40255
3360 $ 1 WAUKESHA BEARING CORP PN 064601002-000 INFLATABLE SEAL ENGRAVED A00232119000 SHCS 1/ 2-13X3 MONE/ W NYLOK DOWEL PIN 1/ 2" X 3/ 4" LB 303SS GASKET ELEMENT 515 PURPLE
3361 $ 1 REGULATING VALVE PN 40057-01 30 CU FT MFR UNKNOWN
3362 $ 1 REGULATING VALVE PN 40057-01 30 CU FT MFR UNKNOWN
3363 $ 1 LOT (3)WAUKESHA BEARINGS CORP PN 164480003-000 SHAFT SEAL ASSY
3364 $ 1 LOT (2)PLT HARDWARE TO INCL:(APPROX 19)CORROSION ANODE, (APPROX 38)FT METALLIC TUBE, (1)FIXT PN 363295G01
3365 $ 1 LOT (APPROX 166)FT NON-METALLIC HOSE ENGRAVED PARKER NO-SKIVE 381-12WP 21, 5 MP 3125 PSI MSHA IC-40-26-SAE100RZAT-12 19MM 3/ 4" X 2"W ISO 1436/ 2 AT-19-EN853-25N-19-DIN-4-2Q02
3366 $ 1 STORAGE TUBE ASSY ENGRAVED M20-06-06-MSCK DIMENSIONS 186"L X 9"W X 11"H MFR/ PN UNKNOWN
3367 $ 1 HOWELL INSTURMENT PN H338N-607 CABLE ASSY SET TO CONSIST OF POWER CABLE 115VAC, 50-400 HZ, AMBIENT TEMP PROBE, CABLE ASSY TAMB PROBE, CABLE ASSY POWER 28VDC, CABLE ASSY SIG CABLE EXT, ENGINE SIGNAL ADAPTER, SWITCH BOX, ENGINE SELECT, CABLE ASSY SIGNAL INPUT, MANUAL
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 24 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
3368 $ 1 HOWELL INSTURMENT PN H338N-607 CABLE ASSY SET TO CONSIST OF POWER CABLE 115VAC, 50-400 HZ, AMBIENT TEMP PROBE, CABLE ASSY TAMB PROBE, CABLE ASSY POWER 28VDC, CABLE ASSY SIG CABLE EXT, ENGINE SIGNAL ADAPTER, SWITCH BOX, ENGINE SELECT, CABLE ASSY SIGNAL INPUT, MANUAL
3369 $ 1 LEAR SIEGLER MDL DC 4. 2-0RD/ 28 GAS DRIVEN GENERATOR SET SN 6749, 28DC VOLT, 150A, 4. 2KW, METER INDICATES 37 HRS, W/ (1)TELEDYNE MDL 4A032-4 4 CYL AIR COOLED ENGINE DIMENSIONS 29" X 36" X 16"
3370 $ 1 TITAN MDL 55244 AIRCRAFT REFUELING HOSE, MAX WEIGHT 300PSI, DIMENSIONS 5" DIAMETER X 367" LONG
3400 $ 1 EMERSON ELECTRIC, MDL: 25K, SN: 2161-143R85, AIRCRAFT LOADER, TRUCK LIFT PLATFORM, 8 CYLINDERS, RE MANUFACTURED 6-18-1985, 106 HOURS, 25, 000 RATED CAPACITY, AIR BRAKES, AUTO TRANS, REAR PNEUMATIC BRAKES, 2-FRONT WHEELS, 4 REAR WHEELS, 900/ 15 WHEEL SIZE, 8. 2 L DIESEL, BUYER LOAD.
3410 $ 1 GICHNER MOBILE SYSTEMS, MDL: 4003, AIR MOBILE TRANSPORT TRAILER. BUYER LOAD.
3411 $ 1 MFR UNKN, MDL: B1, P/ N 9875047R16420, AIRCRAFT MAINTENANCE PLATFORM, STEEL PLATED PLATFORM. BUYER LOAD.
4300 $ 1 LOT (5)MFG 10001 SPECIAL CABLE ASSEMBLY PN-3221133
4306 $ 1 LOT (21)(IN 1 BOX) ISLAND COMPONENTS GROUP INC ALTERNATING CURRENT MOTORS PN-IMHB-004
4308 $ 1 LOT (2)(IN 1 BOX) PARKER HANNIFIN CORP AXIAL PISTON PUMP PN-AP2V-111-01(LOCATED IN CAGE)
4311 $ 1 LOT (25) IN 1 BX SPD TECHNOLOGIES INC GEARCASE MOTORS PN:703607A
4314 $ 1 LOT (10)LOCKHEED MARTIN CORP, DEHUMIDIFIERDESICANT CONTAINER, PN:NR3000-5AA
4315 $ 1 LOT (49) APPRX MFR: 80064 FLEXIBLE PIPE SPACER W/ STEEL BACKUP RING (CHINOOK CH-47 HELICOPTER) PN-1574299PC 11 AND 12
4316 $ 1 LOT (10)IN (2)BOXES MFR:79343 LIMIT STOP ASSEMBLY(ACFT REFUELER R-9 VEHICLE)PN:02320-2114
4426 $ 1 LOT (1)TRI-WALL ELECTRICAL CONNECTORS TO INCLUDE: CABLE CLAMP ADAPTERS, ELECTRICAL CONTACT, DUMMY CONNECTOR PLUG, CONTACT PINS
4427 $ 1 LOT (1) TRI-WALL ACFT BEARINGS TO INCLUDE: ANNULAR BALL BEARINGS, CYLINDRICAL ROLLER, BALL BEARINGS
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 25 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
4428 $ 1 LOT (1)TRI-WALL ACFT TOOLS TO INCLUDE:BLADE CHECKING UNIT, CABLE ASSEMBLY SET, IMMOBILIZER
4429 $ 1 LOT (1)TRI-WALL ELECTRICAL CONNECTORS TO INCLUDE:RECEPTACLE CONNECTOR, BODY PLUG, CONNECTOR ASSEMBLY
4431 $ 1 LOT (1) TRI-WALL ACFT INCLUDE: FILTER ELEMENTS, AIR HOSE ASSEMBLY, LIGHT INDICATING PANEL
4432 $ 1 LOT (1)TRI-WALL TO INCLUDE:CORD ELECTRICAL, CABLE ASSEMBLY SPEC, CABLE POWER RADI, CABLE TELEPHONE, LEAD ELECTRICAL
4433 $ 1 LOT (1)TRI-WALL TO INCLUDE:BOLT MACHINE, PACKING ASSEMBLY, BOLT INTERNAL WRENCH, NUT SLEEVE, WASHER FLAT
4434 $ 1 LOT (1) TRI-WALL CABLE ASSEMBLY INCLUDES: WIRING HARNESS, POWER JUMPER ASSEMBLY, CABLE ASSEMBLY
4435 $ 1 LOT (1) TRI-WALL HARDWARE INCLUDE: RUBBER EXTENSION, SPLIT RING, MACHINE THREAD PLUG, ASSEMBLY SCREW
4450 $ 1 ALLISON DIVISION GENERAL MOTORS CORPORATION TOOL NUMBER X3811 PRESS, ENGINE MODEL T40
4451 $ 1 LOT (15) AERIAL CARGO SLINGS, 10000 POUND CAPACITY, SLING MATERIAL TYPE WEB STRAP, DESIGN TYPE LOOP
4452 $ 1 LOT (4452)AERIAL DELIVERY CARGO SLINGS, DESIGN TYPE LOOP, SLING MATERIAL TYPE WEB STRAP
4453 $ 1 LOT (15) AERIAL DELIVERY CARGO NETS IN 2 STORAGE AND SHIPPING CONTAINERS
4454 $ 1 LOT (43) ALUMINUM AIRCRAFT SHIMS, 40" X 20 1/ 2", . 032 THICKNESS
5300 $ 1 ONE TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: EXHAUST GAS TESTERS; ANNULA BALL BEARINGS; POWER SUPPLY; OVERHEAD SLACK ADJUSTER; PNEUMATIC FISHLINE; SLEEVE SPACER; HOSE ASSEMBLY. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5301 $ 1 ONE TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: EXHAUST GAS TESTERS; PACKING WHEELS; MANUAL CONTROL LEVER; HOSE ASSEMBLY; POWER SUPPLY. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5302 $ 1 ONE TR-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: EXHAUST GAS TESTERS; GENERAL DOOR ACCESS; PULLEY GROOVE; PYROMETER OPTICAL; FUEL INJECTOR NOZZLES. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 26 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
5303 $ 1 ONE TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: ACCESS COVER; ATM CARD; ALIGNMENT TOOL KIT; COOPER B-LINE CLAMPS; BASE MOUNTING; VALVE ASSEMBLY; TUBING RUBBER. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5304 $ 1 ONE TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: EXHAUST GAS TESTERS; GENERAL LIGHT SETS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5305 $ 1 ONE TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: JUNCTION BOX; ELECTRONIC FEEDER SYSTEM; LUG KITS; MOUNTS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5306 $ 1 BATCH LOT OF AEROSPACE ITEMS TO INCLUDE: LIGHT CONTROL PANEL; TRANSMISSION ASSEMBLY; SATELLITE DISH; POWER CABLE ASSEMBLY. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT
5307 $ 1 LOT (2) AEROSPACE ITEMS TO INCLUDE: EQUIPMENT RACK E-SYSTEMS; FREQUENCY CONVERTER, POWER TRANSFORMER, MDL# 3FC-640-15-1473, S/ N 91473-001, VOLTS 277/ 480, 20 AMPS, 450 LBS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5308 $ 1 ONE TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: THERMOCOUPLE HARNESS; TURBINE ROTOR BLADES; COUPLINGS; SEARCHLIGHTS; ROLL ELECTRICAL WIRE. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5309 $ 1 LOT (4) AEROSPACE ITEMS TO INCLUDE: RED TOOL BOXES WITH TOOLS TO INCLUDE. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5310 $ 1 TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: STATIC EXCITER; VANEAXIAL FAN; QUICK DISCONNECT TEES; CONNECTING LINK RIG; METAL TUBE ASSEMBLY; BALL VALVES; TAILPIPE EXPANDERS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5311 $ 1 TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: MOUNT ASSEMBLIES; LIQUID TRANSMITTERS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5312 $ 1 TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: INSULATION SHEETS; HEAD VALVE; POWER TRANSFORMERS; RECEPTACLE CONNECTOR; LIGHTING FIXTURE; PLAIN ENCASED SEALS; BOLT MACHINE; HYDRAULIC MANIFOLDS.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 27 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
5313 $ 1 LOT (39) APPRX, AEROSPACE ITEMS TO INCLUDE: INSULATOR PLATES; PILLOW BLOCK; ALTERNATING MOTORS; MOUNTING BRACKETS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5314 $ 1 LOT (13) GROUND HANDLING CRADLES. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5315 $ 1 MFG ESSEX ELECTRO ENGINEERS, MDL# A510A, ELECTRICAL LOAD BANK TESTER, S/ N 191. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5316 $ 1 BATCH LOT OF AEROSPACE ITEMS TO INCLUDE: IMPELLOR FAN; PUMP UNIT; BLEEDER UNITS; TOW BAR; FILTER SEPARATORS; VACUUM PUMP; OTHERS, SEE BELOW LISTING FOR APPROXIMATE QUANTITIES
5318 $ 1 PACIFIC CONSOLIDATED INDUSTRIES, SELF-GENERATING NITROGEN SERVICE CART, FLOW RATE 15 SCFM, PURITY 95. 5% MIN, DELIVERY 0-400 PSIG, 400-4000 PSIG, S/ N 6476-190. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5319 $ 1 PACIFIC CONSOLIDATED INDUSTRIES, SELF-GENERATING NITROGEN SERVICE CART, FLOW RATE 15 SCFM, PURITY 95. 5% MIN, DELIVERY 0-400 PSIG, 400-4000 PSIG, S/ N 6476-125. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5320 $ 1 LOT (12) LIGHT SETS. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5321 $ 1 PALLET OF AEROSPACE ITEMS TO INCLUDE: BATTERY CHARGERS; SOLID STATE RELAY; SPECIAL PULLER. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5322 $ 1 TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: ACCESS COVERS; ELECTRONIC MOTOR ASSEMBLY, HAND SCREWED JACKS; REGULATING VALVE; HYDRAULIC ACTUATOR. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5323 $ 1 TRI-WALL BOX OF AEROSPACE ITEMS TO INCLUDE: NONMETALLIC HOSE ASSEMBLY; METALLIC TUBES; LUFTREIFEN STUETZE; METALLIC STAND SUBASSEMBLY; SECURITY RING; BRIDGE PIN PANEL. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5324 $ 1 TRI-WALL BATCH LOT OF AEROSPACE ITEMS TO INCLUDE: HYDRAULIC HAND PUMPS; GENERATOR TEST SETS; CENTRIFUGAL FAN; WHEEL SUPPORT SEALS; TORQUE WRENCH. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 28 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
5325 $ 1 LOT (3) WOODWARD MOTOR GOVERNOR, S/ N 1975002, TYPE# PGP1, P/ N 369511. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5326 $ 1 LOT (3) TRI-WALL BOXES OF AEROSPACE ITEMS TO INCLUDE: FLUID FILTER ELEMENTS; HOSE ASSEMBLY PART KITS; NONMETALLIC HOSE; FLUID REGULATING VALVE; NONMETALLIC SPECIAL SEAL; SPECIAL PURPOSE CABLE; FLUID FILTER. SCREENING AND LOAD OUTS ARE DONE BY APPOINTMENTS ONLY. *PLEASE CALL AHEAD FOR APPOINTMENT*
5500 $ 1 LOT 1 PLTS (APPROX 14 PCS) SUCH AS: HYDRAULIC RAM, POWER TAK OFF VALVE, AIRCRAFT LANDING LIGHT, CIRCLE SEGMENT KEEPER, TUBE & FITTINGS, MILITARY FUEL CAN STAND, & REPAIR KIT.
5501 $ 1 U. S. ELECTRICAL MOTORS/ EMERSON ELECTRIC, MODEL # A-2, AIRCRAFT GENERATOR TEST STAND, SERIAL # J522588, 9000 MAX R. P. M, UNIT HAS 758 HOURS USED.
6000 $ 1 LOT (12)AIRCRAFT TOOLS INCLUDES TORQUE WRENCHES(7), DIAL INDICATORS, TOOL KIT FUEL TANK SEALENT, FIXTURE ENGINE MAINTENANCE, REFUELING NOZZLE
6001 $ 1 LOT( 1PLT)AIRCRAFT PARTS INCLUDES DOOR ACCESS 5266356, RETAINERS, FLAT WASHER, CONTROL SCREW S22-10554-6, SOCKET HEAD CAP SCREW, SWITCH ASSY. 28377, QUICK COUPLING, AMPLIFIER-CONTROL AM-4682/ ASN-76, NUTPLATE, BORESCOPE LIGHT, FREQUENCY READ-OUT(COM)COLLINS TYPE 339R7(5), PRINT-OUT UNIT MADAR II SCI SYSTEMS(6)
6002 $ 1 LOT (4)LIGHT SIGNAL, AIR TRAFFIC, TYPE SDU4/ U, MULTIELEC. MFG. ,W/ POWER SUPPLIES
6501 $ 1 JANKE & CO INC HYDRAULIC SYSTEM TEST STAND PN: 29400 30 GPM 3000 PSI MIN 5000 PSI MAX
6503 $ 1 PRECISE MACHINING FUEL FLOW RATE TEST SET W/ LIQUID CONTROLS M60-40600-2 METER, 150 PSI, FUEL TYPE: JET
6504 $ 1 LOT (3) CECOM LR CENTER GENERAL ILLUMINATION LIGHT SET PN: TIP00188-14APR70
6505 $ 1 INGERSOLL-RAND CO MDL: P-250-W-D-M0595 TYPE MC-5 AIR COMPRESSOR UNIT 250 CFM 100PSIG
6506 $ 1 INGERSOLL-RAND CO MDL: P-250-W-D-M0595 TYPE MC-5 AIR COMPRESSOR UNIT 250 CFM 100PSIG
6507 $ 1 STEWART AVIONICS INC HYDRAULIC SYSTEM FILLER & PRESSURIZATION UNIT PN: E01835
7002 $ 1 AIRCRAFT MAINTENANCE PLATFORM, NO DATA PLATE, 5 STEPS, 500 LB. WEIGHT LIMIT, 4 FT HIGH WORK AREA, ROLL AROUND, L 48" X W 42" X H 83".
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 29 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
7028 $ 1 BRUNSWICK AVIATION SHOP SET, W/ SOUTH BEND ENGINE LATHE MDL 10K, DOERR TYPE KF DRILL PRESS, LISLE DRILL GRINDER MDL 91000, GRINDING MACHINE, VISE, WAYNE TOOL TYPE 12, GRADE A, MACHINE REAMER SET, MULTI-DRAWER STORAGE CABINETS, THREAD REPAIR KIT W/ PARTS MISSING. BUYER LOADS, NO ASSISTANCE AVAILABLE.
7200 $ 1 PRATT & WHITNEY PN PWA14003 SUPPORT, ENGINE TEST MOUNT, W/ SCREEN, BRACKET, & DUCT
7201 $ 1 LOT (1) PLT ELECTRICAL RELATED ITEMS-SUCH AS TRANSISTOR, SEMICONDUCTOR, CAPACITOR, ETC
7202 $ 1 LOT (1) PLT PUMPS, VALVES AND OTHER RELATED ITEMS-SUCH AS PLUG, CYLINDER, RETAINER, ETC TO INCLUDE VICKERS PN 372561 PUMP, ETC
7203 $ 1 LOT (1) PLT ELECTRICAL RELATED ITEMS-SUCH AS CONNECTOR, TRANSISTOR, INDICATOR, ETC
7204 $ 1 LOT (52) APPX ELECTRICAL HEADSETS, CONSISTING OF (2) GENTEX H-182A/ PT W/ MIC AND APPX (50) TELEPHONICS TDH-39, 300 OHMS
7205 $ 1 LOT (23) J. B. T. ELECTRONICS PN 452-0289-001 ROTARY SWITCH
7206 $ 1 LOT (53) APPX VOLTEX PN 455-0439-001 RELAYS
7207 $ 1 LOT (2) CONTINENTAL ELECTRONICS CORP PN 512-0368 TRANSFORMER, IN CRATES
7208 $ 1 LOT (1) PLT ELECTRICAL RELATED ITEMS-SUCH AS CONNECTOR, CABLE, RELAY, ETC
7209 $ 1 LOT (1) PLT BEARINGS & RELATED ITEMS-SUCH AS SLEEVE, BUSHING, ROLLER BEARINGS, ETC
7210 $ 1 MCDONNELL PN 17G130007-1 ALIGNMENT TOOL, BRAKE ASSY, IN CASE
7211 $ 1 LOT (2) RAYTHEON 01-01502-001A REMOTE CONTROL UNIT
7212 $ 1 LOT (17) CABLE ASSY, MFG/ PN UNK, DWG# 66910620-19
7213 $ 1 LOT (2) POWER PRODUCTS INC CA-1550 BATTERY CHARGER/ ANALYZER, PN 4159, W/ MANUAL, UNK IF COMPLETE
7214 $ 1 LOT (2) POWER PRODUCTS INC CA-1550 BATTERY CHARGER/ ANALYZER, PN 4159, W/ MANUAL, UNK IF COMPLETE
7215 $ 1 LOT (1) PLT ELECTRONIC RELATED ITEMS-SUCH AS POWER SUPPLY, CONTROL, FAN, PROBE, ETC
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 30 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
7216 $ 1 FITTING KIT, MFG/ MDL UNK, HAS 5 DRAWERS WITH MULTIPLE SIZES OF BRASS TYPE FITTINGS
7217 $ 1 MDL UST101419 TOOL ALIGNMENT SET, MFG UNK, IN BOX, UNK IF COMPLETE
7219 $ 1 LOT (1) PLT MAINTENANCE RELATED ITEMS-SUCH AS ADAPTER, JACK. PULLER, FIXTURE, ETC
7221 $ 1 LOT (2) PLTS HARDWARE-SUCH AS BOLTS, BRACKET, SCREW CAP, ETC
7222 $ 1 LOT (377) LBS APPX ALLFAST SYATEMS PN MS20470E6-10 SOLID RIVETS
7223 $ 1 LOT (1) PLT ELECTRICAL RELATED ITEMS-SUCH AS CONNECTOR, RESISTOR, CABLE, ETC
7224 $ 1 LOT (1) PLT ELECTRICAL RELATED ITEMS-SUCH AS CONNECTOR, SEMICONDUCTOR, GUIDE, ETC
7225 $ 1 LOT (4) ROLLS PEPCO PN 714 1/ 4" PLASTIC TUBING, LENGTH UNK, CLEAR
7226 $ 1 SEMCO INC 100-A FUEL TANK REPAIR KIT, W/ MANUAL, HAS SEALANT GUN, MIXER, HOSE & HARDWARE, IN METALIC CASE, UNK IF COMPLETE
7227 $ 1 SARGEANT CONTROLS PN 27017-002 VALVE ASSY, IN CRATE
7228 $ 1 SARGEANT CONTROLS PN 27017-002 VALVE ASSY, IN CRATE
7229 $ 1 LOT (1) PLT HARDWARE-SUCH AS BOLT, NUT, SET SCREW, PIN-RIVET, ETC
7230 $ 1 MARTIN DECKER SU5C-0010 DYNAMOMETER, 0-1000LB
7231 $ 1 MARTIN DECKER SU5C-0010 DYNAMOMETER, 0-1000LB
7232 $ 1 LOT (3) PLTS HARDWARE SUCH AS HOSE, FITTINGS, TUBE, ETC
7233 $ 1 MCDONNELL PN J76E0281-1 ELECTRIC CONVERTER
7234 $ 1 AIRSEARCH/ GARRETT PN 284935-2-1 HOLDER ASSY
7237 $ 1 LOT (1) PLT ELECTRICAL RELATED ITEMS-SUCH AS TRANSFORMER, CABLE, CONNECTOR, CONTACT, ETC
7238 $ 1 U. S. NAVAL AIR SYSTEMS TYPE BCU/ 20-E BATTERY CHARGER/ ANALYZER, ALKALINE TYPE, PN 1591AS100-1
7239 $ 1 MDL 2400A-2 BATTERY CHARGER, MFG UNK
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 31 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
7240 $ 1 BOGUE ELECTRIC 7157 MOTOR-GENERATOR, 440V, 3PH, 15HP, 1500RPM
7241 $ 1 BOGUE ELECTRIC 7157 MOTOR-GENERATOR, 440V, 3PH, 15HP, 1500RPM
7242 $ 1 SOLA-BASIC INDUSTRIES PN 31F POWER TRANSFORMER, KVA 20, 480V, 3PH, 400HZ
7243 $ 1 SOLA-BASIC INDUSTRIES PN 31F POWER TRANSFORMER, KVA 20, 480V, 3PH, 400HZ
7244 $ 1 SOLA-BASIC INDUSTRIES PN 31F POWER TRANSFORMER, KVA 20, 480V, 3PH, 400HZ
7245 $ 1 LOT (6) PCS CONSISTING OF (5) U. S. NAVAL AIR SYETMS PN 318573-2 FLANGE, BANK AND (1) BOEING PN F71201-500 SUPPORT ASSY, IN CRATE
7300 $ 1 GROVE MB2 AIRCRAFT TRACTOR, SN UNK (DATA PLATE MISSING). HAS CUMMINS 6 CYL DIESEL MOTOR-TYPE/ SZ UNK, MI 551. 0, HRS 7005. 6, HAS KEYS. WAS RUNNING WHEN PARKED. CURRENTLY WILL NOT START. HAS HANKOK 1200R24 18 PLY RADIAL TIRES. BUYER LOAD ITEM-RECOMMEND BUYER SUPPLY TRAILER WITH WINCH CAPABILITY. APPOINTMENT REQUIRED FOR REMOVAL/ PREVIEW, HAS 96" WHEEL BASE (SIDE TO SIDE). UNIT WEIGHTS RANGE FROM 38, 000 TO 52, 000LBS AND AM NOT SURE OF THE WEIGT FOR THIS PARTICULAR ONE.
7302 $ 1 LANDOLL CORP/ FORD MOTOR CO TYPE TM 1800 AIRCRAFT WING DEICER, 8/ 85, VIN 1FDRD84NGFVA50487, HAS FORD 800 BODY, AUTO TRANS, GVWR 35000, TIRES SZ 11. 0 X 20 WITH SOME DRY ROT, HAS PERKINS 4 CYL DIESEL MOTOR. HAS KEYS AND WAS RUNNING WHEN PARKED. APPOINTMENT REQUIRED FOR VIEWING/ REMOVAL. HAS 2 BATTERIES BUT LOOKS LIKE COMPARTMENT HOLDS 4EA. BUYER LOAD ITEM
7303 $ 1 GROVE MB2 AIRCRAFT TRACTOR, SN UNK (DATA PLATE MISSING). HAS CUMMINS 6 CYL DIESEL MOTOR-TYPE/ SZ UNK, MI 2225. 3, HRS 7482. 8, HAS KEYS. WAS RUNNING WHEN PARKED. CURRENTLY WILL NOT START. HAS HANKOK 1200R24 18 PLY RADIAL TIRES. BUYER LOAD ITEM-RECOMMEND BUYER SUPPLY TRAILER WITH WINCH CAPABILITY. APPOINTMENT REQUIRED FOR REMOVAL/ PREVIEW, HAS 96" WHEEL BASE (SIDE TO SIDE). UNIT WEIGHTS RANGE FROM 38, 000 TO 52, 000LBS AND AM NOT SURE OF THE WEIGT FOR THIS PARTICULAR ONE.
7400 $ 1 STEWERT & STEVENSON SERV. MB-2 AIRCRAFT TOWING TRACTOR, SN 144-67, 30000LB CAPACITY. MI 01322. 2, HRS 01097. 7, HAS KEYS UNK IF RUNS
8100 $ 1 AIRCRAFT STAIRCASE POWERED BY FORD F350, GAS, 6 CYL. ENGINES, 54, 283 MILES, YR-1989, VIN# 1FDJF37Y0KNB66021 (BUYERS LOAD)
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 32 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
8601 $ 1 GICHNER MOBILIZERS M1022 DOLLY TRAILER SET LIFT TRANSPORTABLE SHELETER, PAYLOADS 15000LBS. (ALL TIRES FLAT)
8700 $ 1 LOT (2) EA. ON (1) PLT. TAYLOR INSTRUMENT CO. SEAL CONTROLLER, 1601193-003, 0-150 F, 24" X 22" X 23, 751 LBS.
8701 $ 1 LOT (29) EA. ON (1) PLT. ELECTRICAL & ELECTRONIC EQUIPMENT COMPONENTS TO INCLUDE: NIBCO CO. ONX-CPVC CARTRIDGE, 2 1/ 2" IN DIAMETER, 22" X 3 1/ 2" X 3 1/ 2", CELLTRON INC. CABLE ASSEMBLY, P/ N: A3247163, SENSOR SYSTEMS, LLS DBA WIRE WAND PRE-RESISTOR VARIABLE, P/ N: 128C380H01.
8702 $ 1 LAMBDA ELECTRONICS CORP. , REGULATED POWER SUPPLY, LMEE 28-3262, INPUT 105-132 V, 55-65 HZ, DERATE CURRENT 10%, FOR 45-55 HZ. , 12. 0 A @ 40 DEGREES CELCIUS, 11. 0 A @ 50 DEGREES.
8704 $ 1 SCANRAY CORP. , POWER SUPPLY, 08-1332-B, OUTPUT 0-90 KV, INPUT 0-105 VAC.
8705 $ 1 NH RESEARCH INC. , LOAD CONTROL MASTER, P/ N: 10-1088-00.
8706 $ 1 PT INC. , HOSE ASSEMBLY, POLYPROPYLENE MATERIAL, DURABLE MATERIAL.
8707 $ 1 LOT (5) EA. ON (2) PLTS. MID-WEST METAL PRODUCTS INC. , ELECTRICAL EQUIPMENT RACK, DEPTH 26. 0" NOMINAL, HEIGHT 80. 375 INCHES NOMINAL, PERFORATED VENTILATION DESIGN, GREY IN COLOR, STEEL MATERIAL, SURFACE TREATMENT ENAMEL.
8708 $ 1 LOT APPRX. (478) EA. ON (3) PLTS. HOSES AND FITTING TO INCLUDE: BLIND PIPE FLANGE, FLUID PASSAGE BOLT, CARGO TUBE ASSEMBLY, AIR DUCT HOSE, SEDIMENT STRAINER, STRUCTURAL TUBE, DIRECT VALVE LINER AND MORE.
8709 $ 1 LOT (19) EA. ON (1) PLT. GOODYEAR TIRE AND RUBBER COMPANY PNEUMATIC TIRE, 24. 5 LBS PSI, SUBLESS TYPE AIR RETENTION METHOD, TIRE PLY ARRANGEMENT RADIAL MAX LOAD CAPACITY 10600. 6 LBS, MAX LOAD.
8710 $ 1 MIRACLE ADHESIVE CORP. PANEL FASTENER ANCHOR, P/ N: STUK-UPS2-3/ 45Q1-3/ 4LG10/ 24THD, STEEL PERFORATED BASE PLATE, 2. 750 SQUARE INCHES, 0. 027 THICK, STEEL STUD, 1. 750 INCHES IN LENGTH, 0. 190-24 THD.
8711 $ 1 LOT APPRX. (6947) EA. ON (1) PLT. PIPE AND TUBING EQUIPMENT TO INCLUDE: SAFETY RELIEF VALVE, MAINTENANCE FIXTURE, GENERATOR TEST SET, VALVE BODY, METALLIC TUBE, METAL TUBE ASSEMBLY AND MORE.
8713 $ 1 LOT APPRX. (8) EA. ON (1) PLT. ELECTRICAL WIRE AND POWER DISTRIBUTION EQUIPMENT TO INCLUDE: CABLE ASSEMBLY SET, ATTITUDE FAST PANEL.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 33 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
8714 $ 1 LOT APPRX. (300) ELECTRICAL EQUIPMENT AND COMPONENTS TO INCLUDE: THERMOSTATIC SWITCH, RADIO CABLE ASSEMBLY, ELECTRICAL CONNECTOR PLUG, DEHYDRATOR ADAPTER, ELECTRICAL ARRESTER, CONDUIT CONNECTOR ELECTROMAGNET RELAY AND MORE.
8715 $ 1 LOT APPRX. (243) EA. ON (1) PLT. PIPE, TUBE AND HOSE EQUIPMENT TO INCLUDE: TUBE SWING JOINT, QUICK COUPLING HALF, HOSE CLAMP, PIPE COUPLING, PIPE REDUCER, AND MORE.
8716 $ 1 LOT APPRX. (336) EA. ON (1) PLT. ELECTRICAL EQUIPMENT COMPONENTS TO INCLUDE: ELECTRICAL HEADSET, PUSH-PULL SWITCH, SOLENOID ASSEMBLY, HEATER COIL, POWER TRANSFORMER, ELECTRICAL COVER SHELL AND MORE.
8717 $ 1 LOT APPRX. (2421) EA. ON (1) PLT. HARDWARE AND ABRASIVES TO INCLUDE: INPUT CRANK, NUT STRIP, MACHINE BOLT, GENERAL ACCESS DOOR, RETAINING RING, BOLT SHEAR, PLATE SPACER, DOOR AND MORE.
8718 $ 1 CECOM LR CENTER HOSE REPAIR KIT, P/ N: 13226E1581, SPECIAL FEATURES CONSISTS OF TOOLS AND MATERIALS NECESSARY FOR PERMANENT REPAIRS TO 6 IN. HOSE LINE, COMPONENTS ARE STORED IN FITTED CHEST.
8720 $ 1 LOT APPRX. (142) EA. ON (1) PLT. PIPE AND VALVE EQUIPMENT TO INCLUDE: TUBE REPAIR PLUG, BOSS REDUCER, PIPE FLANGE, SAFETY RELIEF VALVE, LIFT CHECK VALVE, DRIVE HUB, PRESSURE RELIEF VALVE AND MORE.
8721 $ 1 LOT APPRX. (4262) EA. ON (1) PLT. HARDWARE AND ABRASIVES TO INCLUDE: MOUNT ISOLATOR, MOUNTING BRACKET, PLATE SPACER, PLAIN SEAL, GASKET, LONG CLAMP ASSEMBLY, PACKING ASSEMBLY, RING SPACER, MACHINE THREAD PLUG AND MORE.
8722 $ 1 LOT APPRX. (630) EA. ON (1) PLT. PIPE TUBE HOSE AND FITTINGS TO INCLUDE: GEAR BOX ADAPTER, METAL TUBE ASSEMBLY, TRANSMISSION SUPPORT RACK, UNION NUT, SOLENOID VALVE, PIPE COUPLING, VALVE ASSEMBLY AND MORE.
8723 $ 1 LOT APPRX. (34) EA. ON (1) PLT. ELECTRICAL WIRE AND POWER EQUIPMENT TO INCLUDE: POWER DISTRIBUTION PANEL, MOTOR ROTOR, POWER CABLE ASSEMBLY, POWER SUPPLY AND BATTERY CHARGER.
8724 $ 1 SINCO KIT CABLE, CABLE REEL, P/ N: 50501, S/ N: 278, SLOPE INDICATOR CO. SEATTLE WASHINGTON U. S. A.
8900 $ 1 LOT (1) CPCV TRACTOR TOW, FLIGHT LINE TOW TRACTOR. 1990 DODGE, TURBO DIESEL ENGINE, 6886 MILES. MISSING BATTERY, FAN BELT, ALTERNATOR, AND STARTER. )
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 34 of 35

 

SB2977 - Aerospace
Lot # Bid Amount Qty Description
8901 $ 1 LOT (1) TRUCK, AIRCRAFT CARGO LOADER/ UNLOADED. LOAD CAPACITY 25, 000 LBS, TIRE SIZE 9. 00 X 15 12 PLY. DIESEL ENGINE, RUNS GOOD, 82. 5 HRS. FULLY FUNCTIONAL, ADJUSTABLE DECK.
9001 $ 1 LOT (2) PALLETS OF ELECTRICAL AND ELECTRONIC COMPONENTS CONSISTING OF SWITCHES, CIRCUIT BREAKERS, TRANSFORMER, CAPACITOR, RELAYS AND MORE.
9002 $ 1 LOT (2) PALLETS OF MECHANICAL COMPONENTS CONSISTING OF VALVES, PUMPS, MOTORS, GEARS, BUSHINGS, HOSES, BEARINGS, FILTERS AND MORE.
9003 $ 1 ELECTRICAL AND ELECTRONIC COMPONENTS CONSISTING OF CONNECTORS, CONTACTS, TRANSFORMERS, CIRCUIT BREAKERS, RELAYS, SWITCHES AND MORE.
9004 $ 1 HARDWARE AND ABRASIVES; INCLUDES GASKETS, BOLTS, CLAMPS, RUBBER SHEETS, BUSHINGS, O-RINGS, PACKING AND MORE.
9005 $ 1 LOT (2) PALLETS OF ELECTRICAL AND ELECTRONIC COMPONENTS CONSISTING OF CABLES, WIRE, CONTACTS, MOTORS AND MORE.
9006 $ 1 LOT (2) PALLETS OF ELECTRICAL AND ELECTRONIC COMPONENTS CONSISTING OF MOTORS, REGULATOR, POWER SUPPLY AND MORE.
9007 $ 1 LOT (2) PALLETS OF ELECTRICAL AND ELECTRONIC COMPONENTS CONSISTING OF METERS, INDICATORS, TRANSMITTERS, GAGES AND MORE.
9008 $ 1 LOT (5) PALLETS OF MECHANICAL COMPONENTS CONSISTING OF GEARS, PUMPS, BEARINGS, BUSHINGS, SHAFTS, HOUSINGS AND MORE.
For more information on this sale,
please visit our web site at www.govliquidation.com
Page 35 of 35

 


SB2977 - Aerospace - SEALED BID SALE

CREDIT CARD TRANSACTION INFORMATION

If a credit card is to be used as a payment, complete the following information and return this sheet with your sealed bid or, if you choose, fax in with your sealed bid to our office (fax cover sheet attached).

If you choose to use a credit card for a DEPOSIT or PAYMENT IN FULL, charges will not be made to your card until after award of the sale and only for those items you were awarded, if any. Fraudulent use of credit cards will be reported to the appropriate authorities.

Please type or print legibly the following information:

PLEASE SELECT ONE: Use for my deposit only   Use for my payment in full
Please select a credit card for your purchase: Master Card   Visa   American Express
  (We do not accept Discover)

Name or Company Name Exactly as it Appears on Credit Card:
First Name _____________________________ Last Name _____________________________
Company Name _______________________________________________________________
Card Number _________________________________________________________________
Expiration Date: Month ____________ Year ____________
**CSC Code (Card Security Code): ________________________ (Located on back of Credit Card)
Billing address exactly as it appears in your credit card statement:
Street ____________________________________________________________ Apt. _______
City ___________________________________ State _______________ Zip ______________
Phone number associated with your billing address: ___________________________________

I/We hereby authorize GOVERNMENT LIQUIDATION, to obtain payment by credit card, as selected above, for the item or items we are awarded in this sale.

Authorized Signature _______________________________________ Date ________________

Upon receipt of your invoice, should you decide to change your credit card instructions from "use for my deposit only" to "use for my payment in full," note on this form your change, initial next to it, and fax to (480) 596-4483.

Corporate Headquarters
15051 N. Kierland Blvd, 3rd Floor • Scottsdale, Arizona 85254
Tel: (480) 367-1300 • Fax: (480) 596-4483
E-mail: info@govliquidation.com • Website: www.govliquidation.com

 

REQUIREMENTS OF A LETTER OF GUARANTEE
FOR ACCEPTANCE OF A COMPANY CHECK

  • Letter must be on official bank letterhead.
  • IMPORTANT: Bank must state that they guarantee the payment of the check being presented. It is not sufficient for the bank to state the credit limit or balance of the company.
  • Letter must state the name of the company for whom the guarantee is for. The check must have the same name printed on it.
  • Letter must contain the account number on which the check is to be drawn and the check must match this same account number.
  • Letter must state an ending date after which the letter of guarantee will expire.
  • Letter must contain a maximum amount for which the bank will guarantee. The check must not be written for more than is guaranteed by the bank.
  • A bank representative must sign the letter.

EXAMPLE OF LETTER OF GUARANTEE:

Government Liquidation
15051 N. Kierland Blvd., 3rd Floor
Scottsdale, Arizona 85254

Dear Sirs:

Please accept this letter as a statement of guarantee for [Company]. [Bank Name] will guarantee payment of the check being presented by [Company] to purchase items at your auction up to an amount no greater than $[amount]. The account number of this check is [account number]. This letter of guarantee will be valid until [Date].

Signed by [Bank Representative]
Title


WIRE TRANSFERS

Johnson Bank   Bank Routing Number 075 911 852
To the Account of Surplus Acquisition Venture, LLC   Account Number 1001477499
SWIFT Code (International Transfers)   JNBKUS44

Johnson Bank
3131 East Camelback Road
Phoenix, Arizona 85016

After you have requested a wire transfer from your bank, please call (480) 367-1300 and advise Customer Service of your wire transfer. Please indicate the sale number and amount of your wire transfer. Failure to do this will result in a delay of your payment.

 

AUTHORIZATION FOR PICK-UP

Buyer Name and Number _________________________________________________________________
Auction Location ______________________________________________ Auction # _________________

I, ________________________________________ , authorize __________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
to remove / pick-up the following lots purchased by the above named Buyer:

Lot No. Description
  
  
  
  
  
  
  
  
  
  

Signature ______________________________________ Date ____________________

Buyers are responsible for the transportation, associated costs and risks in the removal of their property. In addition, a Release of Liability must be signed prior to loading. Government Liquidation will provide tailgate loading and does NOT guarantee a specific loading time. The personnel and/or the equipment providing the "free load" are not under the control of Government Liquidation. Therefore, by accepting the offer of a "free load" and agreeing to the Terms and Conditions of this sale, you agree to hold Government Liquidation harmless for any and all causes of action relating to the loading process.

 

WAIVER AND RELEASE OF LIABILITY

The undersigned, ______________________________________ ("Purchaser"),
has purchased
from Government Liquidation assets located at _________________________.

In consideration for the receipt of loading services with respect to those assets at no cost to Purchaser, Purchaser hereby agrees to release and waive any and all claims, causes of action, damages (including consequential damages and/or loss of use) or liabilities of whatsoever kind or nature against Government Liquidation, its members, officers, agents, employees, successors and assigns arising from or related to, directly or indirectly, such loading services.

This Waiver and Release of Liability is executed this _____ day of _______________, _____.

WITNESS:   PURCHASER:
_____________________________
Signature
  _____________________________
Signature
    _____________________________
Company Name
    _____________________________
Date



15051 N. Kierland Blvd, 3rd Floor • Scottsdale, Arizona 85254
Corporate Office: (480) 367-1100 • Fax: (480) 367-1450 • Customer Service Hotline: (480) 367-1300
E-mail: info@govliquidation.com • Website: www.govliquidation.com

Buyers are responsible for the transportation, associated costs and risks in the removal of their property. In addition, a Release of Liability must be signed prior to loading. Government Liquidation will provide tailgate loading and does NOT guarantee a specific loading time. The personnel and/or the equipment providing the "free load" are not under the control of Government Liquidation. Therefore, by accepting the offer of a "free load" and agreeing to the Terms and Conditions of this sale, you agree to hold Government Liquidation harmless for any and all causes of action relating to the loading process.

 


SEALED BID CHECKLIST

Include sale number on all envelopes, correspondence and checks.
Include a completed sales tax exemption form (Resale Certificate) for this sale if you are sales tax exempt. Form must be included at time of bid submittal (see 11. on the Sealed Bid Terms and Conditions form).
Include a deposit in acceptable funds of no less than 25% of your total bid to have your bid valid.
Fill out all information if paying by credit card. Incomplete information will make your bid invalid.
If submitting your sealed bid package via mail or facsimile transmission, be sure to send it with plenty of time to arrive prior to the deadline.